Show all abstracts
View Session
- Front Matter: Volume 7288
- Plenary Session
- Micro- and Nano- Systems
- PZT Energy Harvesting I
- PZT Energy Harvesting II
- Bio-inspired Systems
- MR Systems I
- MR Systems II
- Energy Harvesting I
- Energy Harvesting II
- Energy Harvesting III
- Shape Memory Alloy Systems
- MR Systems III
- Piezo Systems I
- Piezo Systems II
- Piezo Systems III
- Shape Memory Alloy and Polymer Systems
- Integrated Systems
- Passive and Active Vibration I
- Passive and Active Vibration II
- Passive and Active Vibration III
- Passive and Active Vibration IV
- Passive and Active Vibration V
Front Matter: Volume 7288
Front Matter: Volume 7288
Show abstract
This PDF file contains the front matter associated with SPIE Proceedings volume 7288, including the Title Page, Copyright information, Table of Contents, Introduction, and the Conference Committee listing.
Plenary Session
Energy harvesting: small scale energy production from ambient sources
Show abstract
Energy harvesting - the collection of otherwise unexploited energy in the local environment - is attracting increasing
attention for the powering of electronic devices. While the power levels that can be reached are typically modest
(microwatts to milliwatts), the key motivation is to avoid the need for battery replacement or recharging in portable or
inaccessible devices. Wireless sensor networks are a particularly important application: the availability of essentially
maintenance free sensor nodes, as enabled by energy harvesting, will greatly increase the feasibility of large scale
networks, in the paradigm often known as pervasive sensing. Such pervasive sensing networks, used to monitor
buildings, structures, outdoor environments or the human body, offer significant benefits for large scale energy
efficiency, health and safety, and many other areas. Sources of energy for harvesting include light, temperature
differences, and ambient motion, and a wide range of miniature energy harvesters based on these sources have been
proposed or demonstrated. This paper reviews the principles and practice in miniature energy harvesters, and discusses
trends, suitable applications, and possible future developments.
A paleo-aerodynamic exploration of the evolution of nature's flyers, man's aircraft, and the needs and options for future technology innovations
Show abstract
Insights and observations of fascinating aspects of birds, bugs and flying seeds, of inspired aerodynamic concepts, and
visions of past, present and future aircraft developments are presented. The evolution of nature's flyers, will be
compared with the corresponding evolution of commercial aircraft. We will explore similarities between nature's
creations and man's inventions. Many critical areas requiring future significant technology based solutions remain. With
the advent of UAVs and MAVs, the gap between "possible" and "actual" is again very large. Allometric scaling
procedures will be used to explore size implications on limitations and performance capabilities of nature's creations.
Biologically related technology development concepts including: bionics, biomimicry, neo-bionic, pseudo-mimicry,
cybernetic and non-bionic approaches will be discussed and illustrated with numerous examples. Technology
development strategies will be discussed along with the pros and cons for each. Future technology developments should
include a synergistic coupling of "discovery driven", "product led" and "technology acceleration" strategies. The
objective of this presentation is to inspire the creative nature existing within all of us. This is a summary all text version
of the complete report with the same title that report includes approximately 80 figures, photos and charts and much
more information.
Micro- and Nano- Systems
Superelastic NiTi thin film small vessel graft for vascular repair
Show abstract
Thin film NiTi produced by sputter deposition was used in the design of small vessel grafts intended to
treat small vessel aneurysms. Thin film small vessel grafts were fabricated by "hot-target" DC sputter
deposition. Both stress-strain curves and DSC curves were generated for the film used to fabricate small
vessel grafts. The films used for small vessel grafts had an Af temperatures of approximately 36 degrees
allowing for body activated response from a micro-catheter. Thin film small vessel grafts were tested in
a pulsatile flow loop in vitro. Small vessel grafts could be compressed into and easily delivery in < 3 Fr
catheters. Theoretical frictional and wall drag forces on a thin film NiTi small vessel vascular graft were calculated and the radial force exerted by thin film small vessel grafts was evaluated theoretically and experimentally. In-vivo studies in swine confirmed that thin film NiTi small vessel grafts could be deployed accurately and consistently in the swine vascular system.
Altering the natural frequencies of cantilevered piezoelectric membranes using negative capacitance circuits
Show abstract
A negative capacitance circuit has been designed to change the effective natural frequency of a
fixed-free piezoelectric strip attached to a non piezoelectric substrate. Experiments have
investigated the extent to which resonances can be shifted using a redesigned negative
capacitance circuit. The design replaces the resistive element in the feedback loop with a
capacitor, effectively causing the behavior of the circuit to become frequency independent. A
PVDF film was mechanically excited and the voltage generated from the piezoelectric effect fed
to the circuit. This paper summarizes the theoretical model and describes ongoing experimental
work.
Electrospinning fabrication and electrochemical properties of lithium cobalt nanofibers for lithium battery cathode
Show abstract
In the present work, we have successfully fabricated nanostructured LiCoO2 fibers using electrospinning
technique from a viscous solution of lithium acetate/cobalt acetate/PVP (Polyvinylpyrrolidone), XRD
(X-ray diffraction) and SEM (scanning electron microscopy) were performed to investigate the phase and
microstructures of the electrospinning fibers respectively. Furthermore CV (cyclic voltammetry) and
charge-discharge experiments were applied to characterize the electrochemical properties of LiCoO2
nanofibers. It is noteworthy that the nanostructured cathode offers a higher charge-discharge capacity
compared with conventional powder or film cathodes, thus LiCoO2 nanofiber cathode may become a
promising candidate for the construction of microscale lithium ion batteries due to its larger surface to
volume ratio.
PZT Energy Harvesting I
Generation of electrical energy using short piezoelectric cantilevers in flowing media
Show abstract
The power supply of wireless sensor systems is an issue of growing importance since replacement of batteries is very
expensive over the sensor lifetime. An energy harvesting system which generates electrical energy from flowing media
without any rotating parts will be presented. The harvester consists of piezoelectric cantilevers which oscillate in a media
flow and convert kinetically energy into electrical energy. A model of the harvester was developed and the influence of
geometrical parameters was simulated. Important design information was achieved as result of the simulation. Several
harvester systems were built up using commercially available and not optimized PZT ceramic plates. Measurements were
carried out in wind and water channels. It was found that the output voltage of the harvesters increase with the streaming
velocity of the media. An output power of about 0.1mW was achieved at power adjustment in air. Optimized harvesters
could deliver an up to two orders higher output.
Comparisons between parallel- and series-SSHI interfaces adopted by piezoelectric energy harvesting systems
Show abstract
Advances in piezoelectric energy harvesting have motivated many
research efforts to propose suitable electronic interfaces for power
optimization. Two kinds of electronic interfaces are currently used
in literature. The common one is the standard interface which
includes an AC/DC rectifier followed by a filtering capacitance.
Another recently emerged one is the 'synchronized switch harvesting
on inductor' (SSHI) which is added to the piezoelectric element
together with the standard DC technique. It has been shown that the
latter has several advantages over the former; however, the effect
of frequency deviation from resonance on the electrical behavior of
an SSHI system is not taken into account from the original analysis.
We here propose several improved estimates for both Parallel- and
Series-SSHI interfaces accounting for this effect, and make
comparisons between these two. It shows that both Parallel- and
Series-SSHI systems exhibit significant improved bandwidth, while
the electrical behavior of the Parallel-SSHI (Series-SSHI) system is
similar to that of a strongly coupled electromechanical standard
system operated at the short (open) circuit resonance.
Vibration analysis of the zigzag micro-structure for energy harvesting
Show abstract
An analytical method is developed to calculate the natural frequencies and the corresponding mode shapes of a zigzag
structure proposed for MEMS energy harvesting from ambient vibrations. The high natural frequencies of the existing
designs of MEMS vibrational energy harvesters are serious drawbacks. A zigzag design is proposed to overcome this
deficit. The governing partial differential equations are solved using separation of variables for each of the lateral beams
in the structure. The vibration of each beam is related to the vibration of its neighbor beams by continuity and
equilibrium conditions. Finally enforcing the boundary conditions results the corresponding eigenvalue problem
revealing the natural frequencies and mode shapes. The usefulness of the design is proved by the relation between the
natural frequencies and number of elements, providing a method of designing a MEMS harvester with low natural
frequency.
Development and testing of a MEMS piezoelectric energy harvester
Show abstract
This paper presents a finite element analysis of an interdigitated ( d33 ) piezoelectric unimorph cantilever beam for
harvesting vibration energy. The key feature that is analyzed is the poling behavior of the piezoelectric material.
While simplified models of interdigitated piezoelectric devices assume some uniform and well-defined poling
pattern, the finite element modeling shows that not to be the case. In this paper, a "percent poling factor" is
developed with which to capture the real losses associated with non-uniform poling. A parametric study is carried
out in which electrode patterns, piezoelectric layer dimensions and electrode dimensions are varied to see their effect
on this percent poling factor. Optimal parameters are pointed out. Finally, experimental energy harvesting results
for a micro-scale interdigitated beam are presented.
Novel two-stage piezoelectric-based electrical energy generators for low and variable speed rotary machinery
Show abstract
A novel class of two-stage piezoelectric-based electrical energy generators is presented for rotary machinery in which the input speed is relatively low, varies significantly over time, and is even reversing. This class of energy generators is highly suitable for applications such as wind mills, turbo-machinery used to harvest tidal flows, and the like. Current technology uses magnet-and-coil-based rotary generators. However, to make the generation cycle efficient, gearing or other similar mechanisms have to be used to increase the input speed to the generator. Variable speed-control mechanisms are also usually needed to achieve high mechanical to electrical energy conversion efficiency. This novel class of electrical energy generators uses a decoupled two-stage system. The harvesting environment (wind, tidal flow, etc.) directly provides input to the primary system. The low and varying input motion is then used to successively excite an array of vibrating elements (secondary system). The key advantage is that by having two decoupled systems, the low speed and highly varying input motion is converted into constant and much higher frequency mechanical vibrations, which are then harvested using piezoelectric elements. As a result, by eliminating the need for gearing and speed control mechanisms, the system complexity and cost - including those related to maintenance and service - is significantly reduced. Additionally, these novel generators can expand the application of power generation to much slower input speeds than are harvestable using current technology.
PZT Energy Harvesting II
Piezoelectric energy harvesting from multifunctional wing spars for UAVs: Part 1. Coupled modeling and preliminary analysis
Show abstract
This paper discusses the basic design factors for modifying an original wing spar to a multifunctional load-bearing -
energy harvester wing spar. A distributed-parameter electromechanical formulation is given for modeling of a multilayer
piezoelectric power generator beam for different combinations of the electrical outputs of piezoceramic layers. In
addition to the coupled vibration response and voltage response expressions for a multimorph, strength formulations are
given in order to estimate the maximum load input that can be sustained by the cantilevered structure without failure for
a given safety factor. Embedding piezoceramics into an original wing spar for power generation tends to reduce the
maximum load that can be sustained without failure and increase the total mass due to the brittle nature and large mass
densities of typical piezoelectric ceramics. Two case studies are presented for demonstration. The theoretical case study
discusses modification of a rectangular wing spar to a 3-layer generator wing spar with a certain restriction on mass
addition for fixed dimensions. Power generation and strength analyses are provided using the electromechanical model.
The experimental case study considers a 9-layer generator beam with aluminum, piezoceramic, Kapton and epoxy layers
and investigates its power generation and load-bearing performances experimentally and analytically. This structure
constitutes the main body of the multifunctional self-charging structure concept proposed by the authors. The second
part of this work (experiments and storage applications) employs this multi-layer generator along with the thin-film
battery layers in order to charge the battery layers using the electrical outputs of the piezoceramic layers.
Piezoelectric energy harvesting from multifunctional wing spars for UAVs: Part 2. Experiments and storage applications
Show abstract
This paper is the second part of a two-part series investigating the development of multifunctional piezoelectric energy
harvesting devices to be used in unmanned aerial vehicle and micro air vehicle applications. The proposed self-charging
structures include piezoelectric layers and novel thin-film battery layers bonded to a substrate layer in order to create a
multilayer, self-charging, load bearing energy harvesting device. Part 1 of this work (coupled modeling and preliminary
analysis) presents a distributed parameter electromechanical model used to predict the response of the proposed selfcharging
structures under harmonic base excitation. The model is compared to experimental results and found to be
quite accurate. This paper investigates the fabrication and experimental evaluation of the self-charging structures. A
detailed analysis of the thin-film batteries used in the self-charging structures is carried out, and their electrical and
mechanical performance is evaluated. Typical charge and discharge curves are generated and analyzed. The fabrication
process involved in creating self-charging structures is also outlined, including details on bonding of the layers and
establishing electrical connections. A simple energy harvesting circuit is designed to allow the transfer of energy from
the piezoelectric layers to the battery layers. Lastly, the energy harvesting performance of the self-charging structure is
evaluated and typical charge and discharge time histories are recorded for the structure under base excitations.
Novel two-stage piezoelectric-based ocean wave energy harvesters for moored or unmoored buoys
Show abstract
Harvesting mechanical energy from ocean wave oscillations for conversion to electrical energy has long been pursued as an alternative or self-contained power source. The attraction to harvesting energy from ocean waves stems from the sheer power of the wave motion, which can easily exceed 50 kW per meter of wave front. The principal barrier to harvesting this power is the very low and varying frequency of ocean waves, which generally vary from 0.1Hz to 0.5Hz.
In this paper the application of a novel class of two-stage electrical energy generators to buoyant structures is presented. The generators use the buoy's interaction with the ocean waves as a low-speed input to a primary system, which, in turn, successively excites an array of vibratory elements (secondary system) into resonance - like a musician strumming a guitar. The key advantage of the present system is that by having two decoupled systems, the low frequency and highly varying buoy motion is converted into constant and much higher frequency mechanical vibrations. Electrical energy may then be harvested from the vibrating elements of the secondary system with high efficiency using piezoelectric elements.
The operating principles of the novel two-stage technique are presented, including analytical formulations describing the transfer of energy between the two systems. Also, prototypical design examples are offered, as well as an in-depth computer simulation of a prototypical heaving-based wave energy harvester which generates electrical energy from the up-and-down motion of a buoy riding on the ocean's surface.
Development of an innovative energy harvesting device using MFC bimorphs
Show abstract
Recently, widespread attention has been directed towards scavenging energy from renewable sources such as wind.
Piezoelectric materials are particularly suitable for capturing energy from motion since mechanical deflection of a
piezoelectric specimen results in an electric displacement. This electricity can be stored in batteries or used to power
portable devices. The present work is on the development of a device that can generate electricity from an oscillating
motion using a piezoelectric Macro Fiber Composite (MFC) bimorph. Previously, bimorph vibration was created by a
rotating or reciprocating part hitting the bimorph tip; whereas in the current work, base reciprocation excites the
piezoelectric bimorph. The device includes a fan blade, which aligns with the direction of the wind and moves a rod in
vertical direction. The microfiber composite beams (MFC) are attached to the upper end of the rod. Reciprocation of the
rod acts as a harmonic excitation for the MFC bimorphs. Vibration of the MFCs produces electricity which is stored in a
capacitor to be used to power electronic systems such as different types of remote sensors. Simulation and experimental
results have been compared. In vibration and wind tunnel experiments, comparable amounts of energy were collected
and accumulated in a capacitor.
Piezoelectric resonance shifting using tunable nonlinear stiffness
Timothy Reissman,
Eric M. Wolff,
Ephrahim Garcia
Show abstract
Piezoelectric cantilever devices for energy harvesting purposes have typically been tuned by manipulating beam
dimensions or by placement of a tip mass. While these techniques do lend themselves well to designing a highly tuned
resonance, the design is fixed and causes each system to be unique to a specific driving frequency. In this work, we
demonstrate the design of a nonlinear tuning technique via a variable external, attractive magnetic force. With this
design, the resonance of the piezoelectric energy harvester is able to be tuned with the adjustment of a slider mechanism.
The magnetic design uses the well of attraction principle in order to create a varying nonlinear stiffness, which shifts the
resonance of the coupled piezoelectric beam. The significance of this work is the design of a piezoelectric energy
harvesting system with a variable resonance frequency that can be adjusted for changes in the driving frequencies over a
wide range without the replacement of any system components; thus, extending the usefulness of these vibration energy
harvesting devices over a larger frequency span.
Bio-inspired Systems
Incorporation and characterization of biological molecules in droplet-interface bilayer networks for novel active systems
Show abstract
Biological molecules including phospholipids and proteins offer scientists and engineers a diverse selection of
materials to develop new types of active materials and smart systems based on ion conduction. The inherent
energy-coupling abilities of these components create novel kinds of transduction elements. Networks formed from
droplet-interface bilayers (DIB) are a promising construct for creating cell mimics that allow for the assembly
and study of these active biological molecules. The current-voltage relationship of symmetric, "lipid-in" dropletinterface
bilayers are characterized using electrical impedance spectroscopy (EIS) and cyclic voltammetry (CV).
"Lipid-in" diphytanoyl phosphatidylcholine (DPhPC) droplet-interface bilayers have specific resistances of nearly
10MΩ•cm2 and rupture at applied potentials greater than 300mV, indicating the "lipid-in" approach produces
higher quality interfacial membranes than created using the original "lipid-out" method. The incorporation
of phospholipids into the droplet interior allows for faster monolayer formation but does not inhibit the selfinsertion
of transmembrane proteins into bilayer interfaces that separate adjacent droplets. Alamethicin proteins
inserted into single and multi-DIB networks produce a voltage-dependent membrane conductance and current
measurements on bilayers containing this type of protein exhibit a reversible, 3-4 order-of-magnitude conductance
increase upon application of voltage.
New carbon nanotube antenna array simulation and fabrication
Show abstract
A novel THz antenna structure, made of carbon nanotube arrays is suggested. Using CST MICROWAVE STUDIO (CST MWS), the capabilities of carbon nanotube terahertz (THz) antenna arrays have been simulated and this CNT antenna array has been fabricated.
Cruise and turning performance of an improved fish robot actuated by piezoceramic actuators
Show abstract
The purpose of this study is improvement of a fish robot actuated by four light-weight piezocomposite actuators
(LIPCAs). In the fish robot, we developed a new actuation mechanism working without any gear and thus the actuation
mechanism was simple in fabrication. By using the new actuation mechanism, cross section of the fish robot became 30%
smaller than that of the previous model. Performance tests of the fish robot in water were carried out to measure tail-beat
angle, thrust force, swimming speed and turning radius for tail-beat frequencies from 1Hz to 5Hz. The maximum swimming
speed of the fish robot was 7.7 cm/s at 3.9Hz tail-beat frequency. Turning experiment showed that swimming direction
of the fish robot could be controlled with 0.41 m turning radius by controlling tail-beat angle.
Dynamic behavior of LIPCA and modification of a four-bar linkage for mimicking insect flapping frequency
Show abstract
This paper describes an approach to increase the flapping frequency of a previously developed flapper actuated by Lightweight Piezo-
Composite Actuator (LIPCA) to mimic the flapping frequency of Allomyrina Dichotoma of which flapping frequency is typically
30Hz. To achieve this purpose, the dynamic characteristics of the LIPCA and modification of a four-bar linkage have been studied.
The parametric study showed that an appropriate combination of linkage lengths can provide a better moment transmission for a given
flapping angle amplification, thus the flapping frequency could be increased. A newly designed four-bar linkage system was
fabricated based on the parametric study and then tested to verify the possibility. The test results showed that the optimal flapping
frequency of the modified flapper was measured to be about 15 Hz, which is about 50% increases compared to that of the previous
flapper. The modified flapper could also produce 3.02 gram force in vertical direction with 97 degree of flapping angle at the optimal
frequency.
Actuator placement for a bio-inspired bone-joint system based on SMA
Show abstract
This paper presents an actuator placement study for a bio-inspired joint that is part of a smart-materials-based bat wing.
The wing has been designed as part of the BATMAV project with the final goal of developing a biologically-inspired
micro-air vehicle with foldable wings for flapping flight. The wing uses superelastic Shape Memory Alloy (SMA) joints
and SMA muscle wire actuation. A kinematic model for the bat's flapping flight motion has been developed in a
previous paper, while the current paper presents a study to determine attachment points for SMA actuator wires. At the
center of the current analysis is the requirement to maintain compatibility with a typical SMA's strain capabilities while
simultaneously ensuring the required joint angle motion to be achieved. The study yields a range of attachment
parameters, which result in contraction strains of up to 2.5%, appropriate for high-cycle actuation.
MR Systems I
Application of self-tuning Gaussian networks for control of civil structures equipped with magnetorheological dampers
Show abstract
This paper proposes an adaptive neural network composed of Gaussian radial functions for mapping the behavior of civil
structures controlled with magnetorheological dampers. The online adaptation takes into account the limited force output
of the semi-active dampers using a sliding mode controller, as their reaction forces are state dependent. The structural
response and the actual forces from the dampers are used to adapt the Gaussian network by tuning the radial function
widths, centers, and weights. In order to accelerate convergence of the Gaussian radial function network during
extraordinary external excitations, the learning rates are also adaptive. The proposed controller is simulated using three
types of earthquakes: near-field, mid-field, and far-field. Results show that the neural controller is effective for
controlling a structure equipped with a magnetorheological damper, as it achieves a performance similar to the passiveon
strategy while requiring as low as half the voltage input.
Haptic cue device for accelerator pedal using magnetorheological (MR) fluids
Show abstract
This paper proposes a new haptic cue device for vehicle accelerator pedal utilizing magnetorheological (MR) fluids. As a
first step, an MR fluid-based haptic device is devised to be capable of rotary motion of accelerator pedal. Under
consideration of spatial limitation, design parameters are optimally determined to maximize control torque using finite
element analysis. The proposed haptic cue device is then manufactured and integrated with accelerator pedal. Its fielddependant
torque is experimentally evaluated. Vehicle system emulating gear shifting is constructed in virtual
environment and communicated with the haptic cue device. The time responses of the manufactured haptic device are
then experimental evaluated. Haptic cue algorithm using the feed-forward control algorithm is formulated to achieve
optimal gear shifting in driving. Control performances are experimentally evaluated via feed-forward strategy and
presented in time domain.
Nonlinear MR model inversion for semi-active control enhancement
Show abstract
The increased prevalence of semi-active control systems is largely due to the emergence of cost effective commercially
available controllable damper technology such as Magneto-Rheological (MR) devices. Unfortunately, MR dampers are
highly nonlinear, which presents an often over-looked complexity to the control system designer. The well-known
Skyhook Damping control algorithm has enjoyed great success for both fully active and semi-active control problems.
The Skyhook design strategy is to create a control force that emulates what a passive linear damper would create when
connected to an inertial reference frame. Skyhook control is device independent since it generates a desired control
force command output that must be produced by the control system. For simplicity, MR dampers are often assumed to
have a linear relationship between the current input and the force output at a given relative velocity. Often this
assumption is made implicitly and without knowledge of the underlying nonlinearity. In this paper, we show that the
overall performance of a semi-active Skyhook control system can be improved by explicitly inverting the nonlinear
relationship between input current and output force. The proposed modification will work with any semi-active control
algorithm, such as Skyhook, to insure that the controller performance is at least as good as the performance without the
proposed modification. This technique is demonstrated through simulation on a quarter-vehicle system.
MR Systems II
Rheometer characterization of MR fluids in squeeze mode
Show abstract
This study provides a comprehensive analysis of the characteristics of MR mounts in squeeze mode which is the least
commonly-analyzed aspect of MR fluids. The results of the study are based on a novel rheometer that is designed and
fabricated for the purpose of better understanding the characteristics of MR fluids in squeeze mode. The paper describes
the details of the rheometer design. It further provides the test results for MR fluids tested in squeeze mode. The tests
indicate a clumping effect of the fluid when tested in repeated cycles that does not appear to have been documented
previously. The paper describes, in detail, the clumping effect and provides possible reasons for this phenomenon.
Performance robustness of a magnetorheological seat suspension to temperature variations using skyhook control
Show abstract
The harmonic steady-state responses of an MR seat isolator, designed and fabricated at the University of Maryland
for the driver/commander seat of the Expeditionary Fighting Vehicle (EFV), are measured over a temperature
range from 100°C to 1000°C, and the damper behavior is characterized using a variant of the nonlinear
Bingham plastic model. The effect of damper self-heating on the model parameters is investigated and the trends
with temperature variation are presented. Numerical simulations are carried out to investigate seat isolation performance
across a broad frequency spectrum as temperature and payload vary. Conclusions are drawn about the
performance robustness to temperature variations of the semi-active skyhook control algorithm typically utilized
in vibration isolation problems.
Ionic liquids as potential carriers of low viscosity magnetorheological fluids
Show abstract
Based on the latest investigations on the formulation of new magneto-rheological fluids, it is envisioned that the use of
ionic liquids as carriers of magneto-rheological fluids will open new possibilities of applications for these smart fluids
due to the fact that their physical and chemical properties can be fine-tuned in a broad range. This contribution addresses
one potentially important advantage of magneto-rheological fluids which use ionic liquids as novel carriers. In
connection with this, magneto-rheological fluids with a low viscosity in the off-state without compromising other
properties of the formulations (e. g., sedimentation of the dispersed magnetic particles, liquid state of the carriers in a
broad range of temperatures) are often required for specific applications. In this regard, ionic liquids of low viscosity can
be very useful in the development of such magneto-rheological fluids. Thus, this contribution reports on the magnetorheological
properties of iron(II, III) oxide particles dispersed in the ionic liquid 1-ethyl-3-methylimidazolium
thiocyanate (a low viscosity ionic liquid) in the temperature range from 20 °C to 80 °C. The experimental results have
revealed that the apparent viscosity of the dispersion slightly changes with the temperature when a constant magnetic
field is applied and its value mainly depends on the shear rate and the strength of the magnetic field. The viscosity of the
dispersion remains practically unmodified with both the temperature and the magnetic field intensity as the magnetic
saturation of the material is reached; in this regime the viscosity will only depend on the applied shear rate. In contrast,
the yield stress values of the dispersion as well as the corresponding shear stress vs. shear rate curves have shown an
inverse behavior with temperature for a constant magnetic field.
The intelligent seismic retrofitting of structure based on the magnetorheological dampers
Show abstract
Based on the state-of-the-art about seismic damage principles and aseismic strengthening technology, analysis and design
method of seismic retrofitting for earthquake damaged reinforced concrete frame using magnetorheological (MR)
damper is proposed. Three levels of fortification objects are put forward and quantified or intelligent retrofitting of
reinforced concrete frame using MR damper. The experiment system of a three-floor reinforced concrete frame-shear
wall eccentric structure has been built based on Matlab/Simulink software environment and hardware/software resources
of dSPACE. The shaking table experiment of seismic retrofitting of earthquake damaged reinforced concrete frame-shear
wall structure using MR damper is implemented using rapid control prototyping (RCP) technology. The validity of
passive control strategies and semi-active control strategy is verified under El Centro earthquake excitations with
different peak value. The experimental results indicate that MR dampers can significantly enhance aseismic performance
level of the seismic damaged reinforced concrete frame, and meet all the earthquake fortification levels. The aseismic
ability of MR damper intelligent aseismic structure system of auto-reinforcement is much better than both the damaged
structure and the aseismic structure reinforced by the passive damper.
Energy Harvesting I
On structural effects and energy conversion efficiency of power harvesting
Show abstract
The concept of power harvesting works towards developing self-powered devices that do not require replaceable power
supplies. One important parameter defining the performance of a piezoelectric power harvesting system is the
efficiency of the system. However, an accepted definition of the energy harvesting efficiency does not currently exist.
This article will develop a new definition for the efficiency of an energy harvesting system which rather than being
defined through energy conservation as the ratio of the energy fed into the system to maintain the steady state to the
output power, we consider the ratio of the strain energy over each cycle to the power output. This new definition is
analogous to the material loss factor. Simulations will be performed to demonstrate the validity of the efficiency and
will show that the maximum efficiency occurs at the matched impedance; however, for materials with high
electromechanical coupling the maximum power is generated at the near open and closed-circuit resonances with a lower
efficiency.
Evaluation of flexible transducers for motion energy harvesting
Show abstract
Personal electronic devices such as mobile/cell phones, radios and wireless sensors traditionally depend on energy
storage technologies, such as batteries, for operation. By harvesting energy from the local environment, these devices can
achieve greater run-times without the need for battery recharging or replacement. Harvesting energy could also achieve a
reduction in the weight and volume of the personal devices - as batteries often make up more than half the
weight/volume of these devices. Motion energy harvesting is one such approach where energy from mechanical motion
can be converted into electrical energy. This can be achieved through the use of flexible piezoelectric transducer
materials such as polyvinylidene fluoride (PVDF). A problem with these transducer materials it that their behaviour is
non-linear due to operating and environmental conditions. Hence, for this reason researchers have found it has been
difficult to measure the harvesting performance i.e. mechanical-to-electrical conversion efficiency. At CSIRO we are
currently evaluating the performance of flexible transducers for use as motion energy harvesters. Preliminary results
suggest an overall energy harvesting conversion efficiency of 0.65% for a flexible transducer material.
Energy Harvesting II
Results of a water based thermoelectric energy harvesting device for powering wireless sensor nodes
Show abstract
Over the last decade, wireless computing and mobile devices have decreased in size and power requirements. These
devices traditionally have power requirements that necessitate the need for batteries as a power source. As the power
requirements reduce, alternative means of power become available. One of these is the use of thermal energy. The use of
thermal energy requires a high temperature source and a lower temperature sink. Energy is extracted as heat flows from
the hot side to the cold side. The magnitude of the heat source is not as critical as the magnitude of the temperature
difference between the source and sink. One source of temperature difference is that between a body of water and a solar
heated object. A device has been designed and tested to capture thermoelectric energy where one side of the device is
immersed in water. The other side is exposed to solar radiation. Typically, during the day this is warmer than the water.
However, at night this situation is reversed. This paper discusses the design and manufacture of an innovative thermal
energy capturing device. This device was used to capture energy across an air water boundary. Theoretical estimations of
power available from measured temperature differences are compared with the results of the designed device.
Event sensing and energy-harvesting power sources for gun-fired munitions
Show abstract
A novel class of piezoelectric-based event sensing and energy-harvesting power sources is presented for gunfired
munitions. The power sources are designed to harvest energy from firing acceleration and vibratory motions during
the flight. The piezoelectric element may be used to measure setback acceleration level, indicate the barrel exit time and
impact time and force levels for fuzing purposes. The developed power sources have the added advantage of providing
safety, since the fuzing electronics are powered only after the munitions have exited the barrel. The developed
piezoelectric-based energy harvesting power sources produce enough electrical energy for applications such as fuzing.
The power sources are designed to withstand firing accelerations in excess of 120,000 G. In certain applications such as
fuzing, the developed power sources have the potential of completely eliminating the need for chemical batteries. The
design of a number of prototypes, including their packaging for high G hardening, and the results of laboratory, air-gun
and firing tests are presented.
Energy harvesting and wireless energy transmission for embedded sensor nodes
Show abstract
In this paper, we present experimental investigations using energy harvesting and wireless energy transmission to
operate embedded structural health monitoring sensor nodes. The goal of this study is to develop sensing systems
that can be permanently embedded within a host structure without the need for an on-board power source. With this
approach the required energy will be harvested from the ambient environment, or periodically delivered by a RF
energy source to supplement conventional harvesting approaches. This approach combines several transducer types
to harvest energy from multiple sources, providing a more robust solution that does not rely on a single energy
source. Both piezoelectric and thermoelectric transducers are considered as energy harvesters to extract the ambient
energy commonly available on civil structures such as bridges. Methods of increasing the efficiency, energy storage
medium, target applications and the integrated use of energy harvesting sources with wireless energy transmission
will be discussed.
Power harvesting for railroad track safety enhancement using vertical track displacement
Show abstract
A significant portion of railroad infrastructure exists in areas that are relatively remote. Railroad crossings in these areas
are typically only marked with reflective signage and do not have warning light systems or crossbars due to the cost of
electrical infrastructure. Distributed sensor networks used for railroad track health monitoring applications would be
useful in these areas, but the same limitation regarding electrical infrastructure exists. This motivates the search for a
long-term, low-maintenance power supply solution for remote railroad deployment. This paper describes the
development of a mechanical device for harvesting mechanical power from passing railcar traffic that can be used to
supply electrical power to warning light systems at crossings and to remote networks of sensors via rechargeable
batteries. The device is mounted to and spans two rail ties such that it directly harnesses the vertical displacement of the
rail and attached ties and translates the linear motion into rotational motion. The rotational motion is amplified and
mechanically rectified to rotate a PMDC generator that charges a system of batteries. A prototype was built and tested in
a laboratory setting for verifying functionality of the design. Results indicate power production capabilities on the order
of 10 W per device in its current form. This is sufficient for illuminating high-efficiency LED lights at a railroad
crossing or for powering track-health sensor networks.
Energy Harvesting III
Development of an aeroelastic vibration power harvester
Show abstract
Aeroelastic vibration of structures represents a novel energy harvesting opportunity that may offer significant advantages
over traditional wind power devices in many applications. Such a system could complement existing alternative energy
sources by allowing for distributed power generation and placement in urban areas. The device configuration of a
simple two degree aeroelastic system suitable for piezoelectric power harvesting is presented. The mechanical,
electromechanical, and aerodynamic equations of motion governing the dynamics and electrical output of the system as a
function of incident wind speed are derived. The response and current output of one design for a bench top scale
harvester are simulated and presented. Finally, a strategy for expanding the operating envelope of the power harvester is
proposed and discussed.
Optimization of power generation from energy harvesters in broadband stochastic response
Show abstract
This paper presents recent analytical results pertaining to the optimization of power flow from vibratory energy
harvesting systems, using principles from optimal feedback control and network theory. Historically, much of the
research concerning such technologies has presumed that the vibratory energy source, from which power is to be
extracted, oscillates harmonically at a known frequency. In this case, the optimization of power extraction from
such sources by a resonant energy harvester can readily be accomplished through the use of classical impedance
matching techniques. However, in many applications, vibratory power sources exhibit dynamic behavior more
appropriately characterized by a stochastic process. In some cases, the power spectrum of this process may
exhibit a rather wide band. In such circumstances, impedance matching techniques cannot be used to optimize
power flow from the harvester, because the dynamic impedance they prescribe is always anticausal. This paper
presents several theoretical concepts, intended for broad application in the energy harvesting area, which can be
used to optimize power extracted from broadband sources. It is shown that in the broadband case, an optimal
causal impedance still exists which maximizes power generation, but in order to derive it, the dissipation in the
electrical system, as well as the mechanical system, must be taken into account in the system model. Levels of
power generation with this controller are compared to those of the anticausal optimal performance, as well as
to control design techniques that match the anticausal impedance at the resonant frequency. It is demonstrated
that such causal matching techniques can be significantly sub-optimal in broadband applications, especially when
electronic conversion is relatively efficient.
Thermal energy harvesting between the air/water interface for powering wireless sensor nodes
Show abstract
Seventy percent of the Earth's surface is covered by water and all living things are dependent upon this resource. As
such there are many applications for monitoring environmental data in and around aquatic environments. Wireless sensor
networks are poised to revolutionise this process as the reduction in size and power consumption of electronics are
opening up many new possibilities for these networks. Aquatic sensor nodes are usually battery powered, so as sensor
networks increase in number and size, replacement of depleted batteries becomes time consuming, wasteful and in some
cases unfeasible. Additionally, a battery that is large enough to last the life of a sensor node would dominate the overall
size of the node, and thus would not be very attractive or practical. As a result, there is a clear need to explore novel
alternatives to power sensor nodes/networks, as existing battery technology hinders the widespread deployment of these
networks. By harvesting energy from their local environment, sensor networks can achieve much greater run-times, years
not months, with potentially lower cost and weight. A potential renewable energy source in aquatic environments exists
via the temperature gradient present between the water layer and ambient air. A body of water will be either a few
degrees warmer or colder than the air directly above it dependant on its latitude, time of year and time of day. By
incorporating a thermal energy harvesting device into the sensor node deployment which promotes the flow of heat
energy across the thermal gradient, a portion of the energy flow can be converted into useable power for the sensor node.
To further increase this temperature difference during the day the top section can be heated to temperatures above the
ambient air temperature by absorbing the incoming sunlight. As an initial exploration into the potential of this novel
power source we have developed a model of the process. By inputting environmental data, the model calculates the
power which can be extracted by a thermal energy harvesting device. Initial outputs show a possibility of up to 10W/m2
of power available from measured sites assuming a thermal energy harvester operating with Carnot efficiency.
Combined power harvesting from AC and DC sources
Show abstract
There are a number of approaches to power harvesting that are under-exploited in many applications germane to sensing
and communication. Power can usually be obtained from numerous sources - such as solar, thermal, vibrational, and
electromagnetic energy - using a variety of transduction methods. However, in general a power harvesting system and
its associated electronics interface are designed only to exploit a single energy source. This research presents the
development of innovative ways of gathering power and addressing the design issues in providing a unified energy
source from disparate power harvesting approaches, specifically alternating and direct current methods. These power
sources are integrated into a single source to be utilized for sensing and communication. Several circuit designs are
offered to improve the combined energy harvesting performance over that of the individual harvesters. The transient
dynamics of charging a storage capacitor are presented for the individual and combined power sources. Complications
arising from backwards electromechanical and mutual coupling are discussed.
Shape Memory Alloy Systems
Shape-variable sandwich structure with SMA honeycomb core and CFRP skins
Show abstract
The authors proposed a sandwich structure that consists of a shape memory alloy (SMA) honeycomb core and carbon
fiber reinforced plastic (CFRP) skins as a lightweight geometric-variable structure. This method has the better ability to
bend skins with high in-plane stiffness, because the SMA honeycomb core generates a recovery-shear-force and applies
the force uniformly to the skins. Hence, although this sandwich beam is really lightweight and has a moderate specific
bending stiffness, the beam can be bent by raising the temperature. The honeycomb core was made of thin Ti-Ni SMA
foils, and skins were thin unidirectional CFRP laminates. Pre-shear-strain was applied to the SMA honeycomb core, and
the both ends of the two skins were fixed. When the beam was heated, it was bent upward taking the form of a sigmoid
curve. Furthermore, it was verified that the beam was able to generate the sufficient actuation force. Then, when the
specimen was cooled down to the room temperature, the specimen returned to the straight beam again. Hence the twoway
actuation is possible by heating and cooling. Also the mechanism of this bending deformation could be clarified by
a numerical simulation using the finite element method.
Optimal design of a shape memory alloy actuated composite structure with iterative finite element analysis
Show abstract
A method is described for solving an inverse design problem to find the unassembled, stress-free component shapes of a structure thatis integrally actuated with shape memory alloy (SMA) actuators. Morphing and multifunctional structures are of interest in the aerospace industry becasue of the potential for improving structural and aerodynamic performance across multiple operating conditions. The focus of this work is on structures that are morphed with SMA flexural actuators. For the case where the geometry is known for unassembled components, assembly can be simulated to find the assembled shapes of the morphing structure. In the usual design case, however, only the desired shapes as assembled are known in multiple actuation states, and the corresponding unassembled shapes must be determined by an iterative solution process. An iterative finite element analysis approach to this problem is reported here. First an initial guess for the unassembled shapes is made and assembly is simulated with the finite element method. The resulting shapes are found for both SMA phases and compared with the desired shapes. A gradient-based optimization method is employed to update the initial geometry and iteration continues until the desired shapes are achieved. A simplified method of modeling the SMA material behavior is used for computational efficiently. It is found that this approach provides a practical way to solve the inverse design problem for structures that are integrally actuated with SMA material.
Cyclic behavior of superelastic shape memory alloy wire for innovative precast concrete frame connections
Show abstract
Smart precast concrete frame connection based on unbonded shape memory alloy (SMAPCFC) was proposed as a
possible seismic resistance measure for reinforced concrete frame buildings. To investigate the restoring force
characteristics of SMA wire, cyclic tensile tests on superelastic NiTi SMA wires with three diameters were carried out.
The effects of the different loading conditions, namely: cyclic loading-unloading number, strain amplitude, loading
frequency and ambient temperature, on the mechanical behavior described by some fundamental quantities, such as
energy dissipation per cycle, secant stiffness, equivalent damping, residual strain, were examined. The temperature
changes of the SMA wires due to the latent heat under different loading conditions were also discussed.
Design and operation of a fully implantable SMA actuated implant for correcting short bowel syndrome
Show abstract
Short Bowel Syndrome (SBS) is medical condition characterized by insufficient small intestine length, leading to
improper nutrient absorption and significant mortality rates. The complications of current treatment methods have
encouraged the development of a novel treatment method based on mechanotransduction, the process through which
mechanical tensile loading induces longitudinal growth of intestine. Animal based studies with simple extension devices
have demonstrated the potential of the treatment to grow healthy bowel, but an implantable device suitable for clinical
use remains undeveloped. This paper presents the development of an instrumented fully implantable bowel extender
based upon a shape memory alloy driven linear ratchet that can be controlled and monitored remotely. The overall
bowel extender system is described with respect to specifications for pig experimental tests. The functionality of the
mechanical and electrical subsystems of the device are detailed and experimentally validated on the bench top, in
segments of living bowel tissue removed from a pig, and in cadaveric pigs. Mechanical loading characteristics and safe
load limits on bowel tissue are identified. Results from these experiments establish the readiness of the device to be
tested in living pigs, enabling studies to move one step closer to clinical studies.
Design and preliminary testing of a handheld antagonistic SMA actuator for cancellation of human tremor
Show abstract
Essential Tremor is a debilitating disorder that in the US alone is estimated to affect up to ten million people.
Unfortunately current treatments (i.e. drug therapy and surgical procedures), are limited in effectiveness and often pose a
risk of adverse side-effects. In response to this problem, this paper describes an active cancellation device based on a
hand-held Shape Memory Alloy (SMA) actuated stabilization platform. The assistive device is designed to hold and
stabilize various objects (e.g. eating utensils, tools, pointing implements, etc.) by sensing the user's tremor and moving
the object in an opposite direction using SMA actuators configured in biologically inspired antagonistic pairs. To aid in
the design, performance prediction and control of the device, a device model is described that accounts for the device
kinematics, SMA thermo-mechanics, and the heat transfer resulting from electrical heating and convective cooling. The
system of differential equations in this device model coupled with the controller gain can be utilized to design the
operation given a frequency range and power requirement. To demonstrate this, a prototype was built and
experimentally tested under external disturbances in the range of 1-5 Hz, resulting in amplitude reduction of up to 80%.
The extent of cancellation measured for both single-frequencies and actual human tremor disturbances demonstrate the
promise of this approach as a broadly used assistive device for the multitudes afflicted by tremor.
A bistable mechanism for chord extension morphing rotors
Show abstract
Research efforts have shown that helicopter rotor blade morphing is an effective means to improve flight performance.
Previous example of rotor blade morphing include using smart-materials for trailing deflection and rotor blade twist and
tip twist, the development of a comfortable airfoil using compliant mechanisms, the use of a Gurney flap for air-flow
deflection and centrifugal force actuated device to increase the span of the blade. In this paper we explore the use of a
bistable mechanism for rotor morphing, specifically, blade chord extension using a bistable arc. Increasing the chord of
the rotor blade is expected to generate more lift-load and improve helicopter performance. Bistable or "snap through"
mechanisms have multiple stable equilibrium states and are a novel way to achieve large actuation output stroke.
Bistable mechanisms do not require energy input to maintain a stable equilibrium state as both states do not require
locking. In this work, we introduce a methodology for the design of bistable arcs for chord morphing using the finite
element analysis and pseudo-rigid body model, to study the effect of different arc types, applied loads and rigidity on arc
performance.
MR Systems III
Analytical modeling and experimental validation of a magnetorheological mount
Show abstract
Magnetorheological (MR) fluid has been increasingly researched and applied in vibration isolation devices. To date, the
suspension system of several high performance vehicles has been equipped with MR fluid based dampers and research is
ongoing to develop MR fluid based mounts for engine and powertrain isolation. MR fluid based devices have received
attention due to the MR fluid's capability to change its properties in the presence of a magnetic field. This characteristic
places MR mounts in the class of semiactive isolators making them a desirable substitution for the passive hydraulic
mounts.
In this research, an analytical model of a mixed-mode MR mount was constructed. The magnetorheological mount
employs flow (valve) mode and squeeze mode. Each mode is powered by an independent electromagnet, so one mode
does not affect the operation of the other. The analytical model was used to predict the performance of the MR mount
with different sets of parameters. Furthermore, in order to produce the actual prototype, the analytical model was used to
identify the optimal geometry of the mount.
The experimental phase of this research was carried by fabricating and testing the actual MR mount. The manufactured
mount was tested to evaluate the effectiveness of each mode individually and in combination. The experimental results
were also used to validate the ability of the analytical model in predicting the response of the MR mount. Based on the
observed response of the mount a suitable controller can be designed for it. However, the control scheme is not
addressed in this study.
A new model for yield stress of magnetorheological greases/gels under combined effects of magnetic field and temperature
Show abstract
The goal of this study is to develop a new model to describe the behavior of shear yield stress of
magnetorheological greases/gels (MRGs) under the combined effects of applied magnetic field and
temperature. MRGs are a class of field-responsive materials which consist of micron-size ferrous particles
suspended in a grease/gel-like material. The main advantage of a MRG over a MR fluid is that in a MRG,
ferrous particles do not settle. However, the rheological properties of grease carrier materials are very
sensitive to temperature. Therefore, the temperature effect on the yield stress of MRGs may be one of the
main concerns in developing these materials. In this study, the steady-shear magneto-rheological response
of MRGs subject to various temperatures is investigated. All experimental data are obtained for magnetic
fields ranging from 0.14T to 0.53T and temperatures ranging from 10°C to 70°C. It is observed that
temperature has a pronounced effect on the field induced yield stress of MRGs. A new yield stress model
for MRGs which is a function of magnetic field and temperature is proposed based on the Herschel-Bulkley
constitutive equation and the Arrhenius relationship. Excellent agreement between the model predictions
and experimental data is obtained.
Piezo Systems I
Vibration control of piezoelectrically actuated microcantilevers
Show abstract
The vibration control of microelectromechanical structures is an interesting and challenging
research area that is extensively applicable in micro-mass measurement, micro-sensors and
micro-mirror control. An active vibration control technique based on positive position feedback
method is constructed in this paper. This method is used to control the vibration of
microcantilevers through actuation of a piezoelectric layer that covers one side of the
microcantilever. The modified version of positive position feedback used in this paper, employs
a second order compensator for vibration suppression, and a first order compensator provides
damping. Since the positive position feedback control is based on strain sensing approach, it is
extensively applied to piezoelectrically controlled microcantilevers. Similar to conventional
positive position feedback, stability conditions are global and independent of the dynamical
characteristics of the open-loop system. Root locus diagrams are used to find proper compensator
frequency and damping of the closed loop system. A numerical simulation is performed to
evaluate the performance of the modified positive position feedback for both steady-state and
transient dynamic control. The results indicate that the proposed method is more effective in
controlling both steady-state and transient dynamics than conventional positive position feedback.
Design and experimental investigations of high power piezoelectric transducers for a novel squeeze film journal bearing
Show abstract
A novel active squeeze film journal air bearing actuated by high power piezoelectric transducers is presented.
The proposed bearing uses in-air squeeze film levitation to suspend the rotating spindle without contact. Unlike
conventional journal bearings, the presented bearing journal is formed by multiple independently vibrating
surfaces driven individually by piezoelectric transducers. Langevin type piezoelectric transducers with a special
radiation surface are developed. Detailed design procedures to develop the ultrasonic transducers are presented.
A complete spindle-bearing system is constructed to test the proposed squeeze film bearing. Load carrying forces
are measured at different vibration amplitude and compared with the calculated results. The proposed squeeze
film journal bearing is operated in ultrasonic frequency range. The achieved load capacity is about 50N, which
is five times of the load capacity achieved by the previous squeeze film bearings reported in the literatures.
Active and semiactive vibration damping of turbine blades with piezoceramics
Show abstract
In this paper the damping capability of piezoelectric shunting is analysed for bladings. Beside the broadly
used inductance-resistance networks, negative capacitance techniques are considered. For the validation of the
theoretic results, a test rig with a model of a bladed disk with eight blades has been manufactured and equipped
with two collocated piezoceramics at each blade. One of the piezoceramics is used as an actuator for an engine
order excitation. The second piezoceramics is used for shunt damping. The experimental results of the test rig
are compared with numerical results. Therefore, the structure and the piezoceramics are modeled in a finite
element program. The modal excitation forces of the piezoelectric actuators are derived for all modes of the
structure by a static analysis with a specific voltage applied to the piezoceramics. In addition, using the modal
displacement field of the static analysis the modal excitation forces can be calculated. Furthermore, the number
of degrees of freedom of the system is reduced by a modal reduction technique. The electrical behavior of the
piezoceramics connected to each blade is modeled by one degree of freedom and coupled with the mechanical
system described above. The different damping concepts are compared with respect of their effectiveness.
Precise calculation of piezoelectric switching techniques for vibration damping
Show abstract
Piezoelectric shunt damping is new technique to damp mechanical vibrations of structures. Because of the
piezoelectric effect, vibration energy is converted into electrical energy. In the attached network some part of
the energy is dissipated. Switching shunts offer the possibility to adapt to varying excitation frequencies. In
this paper, the damping performance of different switching techniques are calculated considering all important
network parameters and non-idealities in the switching boards. Measurements on a clamped beam are performed
to validate the results, and the switching techniques are applied to a squealing disc brake. It is shown that due
to the piezoelectric shunt damping the sound pressure level can be reduced considerably.
Piezo Systems II
Vibration control of plates featuring periodic arrays of hybrid shunted piezoelectric patches
Show abstract
Periodic arrays of hybrid shunted piezoelectric actuators are used to suppress vibrations in an aluminum plate.
Commonly, piezoelectric shunted networks are used for individual mode control, through tuned, resonant RLC
circuits, and for broad-band vibration attenuation, through negative impedance converters (NIC). Periodically
placed resonant shunts allow broadband reduction resulting from the attenuation of propagating waves in frequency
bands which are defined by the spatial periodicity of the array and by the shunting parameters considered
on the circuit. Such attenuation typically occurs at high frequencies, while NICs are effective in reducing the
vibration amplitudes of the first modes of the structure. The combination of an array resonant shunts and NICs
on a two-dimensional (2D) panel allows combining the advantages of the two concepts, which provide broadband
attenuation in the high frequency regimes and the reduction of the amplitudes of the low frequency modes.
Numerical results are presented to illustrate the proposed approach, and frequency response measurements on a
cantilever aluminum plate demonstrate that an attenuation region of about 1000Hz is achieved with a maximum
8 dB vibration reduction.
Parameter identification of piezoelectric bimorphs for dynamic applications considering strain and velocity dependent effects
Show abstract
Piezoelectric bimorph elements are commonly used in a wide area of applications, among them various actuator
applications in textile machines, applications in sensing like medical tissue identification, or the use in energy
harvesting systems. Especially the last field may create a mass market for piezoelectric elements. Due to their
easy use and low resonance frequency, bimorphs seem to fit energy harvesting demands quite well. To get the
best possible power output, the element has to be designed as good as possible to fit the environmental excitation
characteristics as excitation frequency and amplitude. Due to the need of a good understanding of the resulting
system, a model based approach is desirable for the design of the used bimorphs. This is the case not only in
Energy Harvesting systems but in most of the mentioned applications.
Averaging models for linear piezostructural systems
Show abstract
In this paper, we consider a linear piezoelectric structure which employs a fast-switched, capacitively shunted subsystem
to yield a tunable vibration absorber or energy harvester. The dynamics of the system is modeled as a hybrid system,
where the switching law is considered as a control input and the ambient vibration is regarded as an external disturbance.
It is shown that under mild assumptions of existence and uniqueness of the solution of this hybrid system, averaging
theory can be applied, provided that the original system dynamics is periodic. The resulting averaged system is
controlled by the duty cycle of a driven pulse-width modulated signal. The response of the averaged system
approximates the performance of the original fast-switched linear piezoelectric system. It is analytically shown that the
averaging approximation can be used to predict the electromechanically coupled system modal response as a function of
the duty cycle of the input switching signal. This prediction is experimentally validated for the system consisting of a
piezoelectric bimorph connected to an electromagnetic exciter. Experimental results show that the analytical predictions
are observed in practice over a fixed "effective range" of switching frequencies. The same experiments show that the
response of the switched system is insensitive to an increase in switching frequency above the effective frequency range.
Changing dynamic behavior of periodic structures by using piezoelectric circuitry with negative resistance
J. Zhao,
X. Wang,
J. Tang
Show abstract
Integrating a piezoelectric circuitry, which consists of a piezoelectric transducer connected with electrical circuitry
elements, to a mechanical structure can alter the dynamic behavior of the structural system. From a system dynamics
standpoint, these circuitry elements are analogous to the mass, damping, and stiffness elements in the mechanical
regime. Using op amp circuits we can synthesize circuitry elements with interesting characteristics such as tunable or
negative elements. In this research, we demonstrate that the negative resistance element can reduce the overall system
damping, thereby changing the dynamic response of mechanical structures. In particular, it will be shown that not only
the response amplitude can be amplified; the response pattern in the mistuned periodic structure can be altered
significantly upon the change of local structural properties. Such phenomena are analyzed systematically, and the
potential advantage for structural damage detection is highlighted.
Piezo Systems III
New modular piezo actuator with built-in stress-strain transformation
Show abstract
As known, the electrical induced strain of conventional piezoceramic materials is limited by 0.12 % (2 kV/mm), which
often requires strain transformation designs, like levers, in order to meet application needs. High fabrication accuracy
and low tolerances are crucial points in mechanical manufacturing causing high device costs.
Therefore, we developed a piezoelectric composite actuator with inherent stress - strain transformation. Basically,
piezoceramic sheets are laminated with spring steel of a certain curvature, which can be realised by a comparatively
simple fabrication technique. The working diagram of these composite bow actuators showed a high level of
performance adaptable to a wide range of applications. The authors established the value chain covering the
piezoceramic formulation, the processing technology and the design in view of optimum system performance.
The paper presents an overview of the design principles, simulation and various aspect of fabrication technology
including lamination, sintering and polarization. The new devices are useable in different sectors, for example in
automotive industry as solid state transducer or as the active part in injectors. Moreover, the composite bow actuators
may find application in microsystems technology, micro optics and micro fluidics as well as vibration dampers. The
composite bow actuators can be used as single component transducer, as well as multi-bow actuator in series or parallel
combination on demand.
Smart adaptronic hydrostatic guiding system for machine tool slides
Show abstract
Guiding systems figure amongst the central components in the flux of a machine tool. Their characteristics have a direct
impact on machining accuracy. Hydrostatic guiding systems are preferably used when specific requirements are to be
met with regards to accuracy, stiffness and damping. However, an active intervention in the guiding system of such
conventional systems, i.e. to absorb geometrical guiding rail errors, has so far not been possible. Compared to modular,
conventional systems, adaptronic systems offer considerable cost savings potentials thanks to their increased functional
degree of integration [1].
Design of the dual-output piezoelectric transformer based on load current balance
Show abstract
When a piezoelectric transformer (PT) connected with two slight different loads, the load currents will not be equal,
especially in the case with large loading currents. The current balance issue is thus one of significant issues on the design
of dual-output PT which expected to deliver equal current to external loads. The condition of the load currents balance
and imbalance for dual output PT will be discussed in this paper. The inherent equivalent circuit components of PTs
could be adopted to replace external reactive component in conventional balanced circuit. By setting the operating
frequency and designing the parameters in the equivalent circuit of PTs, the current balance condition can be
accomplished by itself. A dual-output Rosen-type piezoelectric transformer with size 53x15x2.6mm was adopted as the
testing specimen to verify the theoretical prediction. The experimental verification will also be detailed in this paper.
Shape Memory Alloy and Polymer Systems
Swelling effect actuation of shape-memory polymer: mechanism and demonstration
Show abstract
Recently, there is increasing interest in triggering shape recovery of shape-memory polymers (SMPs) by novel inductive
effect. In this paper, many hard works have been carried out to make SMP induced while along with swelling effect.
Based on the Free-volume theory, Rubber Elasticity Theory and
Mooney-Rivlin Equation, it is theoretically and
experimentally demonstrated the feasibility of SMP activated by swelling effect. The mechanism behind it is solvent
acting as plasticizer, to reduce the glass transition temperature (Tg) and melting temperature (Tm) of polymers, make
them softer and more flexible, facilitating the diffusion of the molecules to polymer chains, and then separating them. In
addition to this physical action, the intermolecular interactions among the chains are weakened, because interactions are
hindered at the points where the plasticizer is located. Finally, the Dynamic mechanical analysis (DMA), FTIR study and
glass transition temperature measurement tests were used to exemplify the feasibility of SMP driven by swelling effect.
And it is qualitatively identified the role of swelling effect playing in influencing the transition temperature. Swelling
effect occurs due to the interaction between macromolecules and solvent molecules, leading to free volume of polymeric
chains increasing (namely the flexibility of polymer chains increasing), resulting in the Tg decreasing. All above
mentioned investigation can be used to confirm that the shape recovery is induced by swelling effect. This actuation
almost is applicable for all the SMP and SMP composite, as the swelling theory is almost applicable for all the polymeric
materials.
Shape memory composite deformable mirrors
Show abstract
This paper deals with some of the critical aspects regarding Shape Memory Composite (SMC) design: firstly
some technological aspects concerning embedding technique and their efficiency secondarily the lack of useful
numerical tools for this peculiar design. It has been taken into account as a possible application a deformable
panel which is devoted to act as a substrate for a deformable mirror.
The activity has been mainly focused to the study of embedding technologies, activation and authority. In
detail it will be presented the "how to" manufacturing of some smart panels with embedded NiTiNol wires in
order to show the technology developed for SMC structures. The first part of the work compares non conventional
pull-out tests on wires embedded in composites laminates (real condition of application), with standard pull-out
in pure epoxy resin blocks.
Considering the numerical approach some different modeling techniques to be implemented in commercial
codes (ABAQUS) have been investigated. The Turner's thermo-mechanical model has been adopted for the
modeling of the benchmark: A spherical panel devoted to work as an active substrate for a Carbon Fiber
Reinforced Plastic (CFRP) deformable mirror has been considered as a significant technological demonstrator
and possible future application (f=240mm, r.o.c.=1996mm).
Integrated Systems
Integrated design and analysis of smart actuators for hybrid assistive knee braces
Show abstract
The objective of this paper is to develop smart actuators for knee braces as assistive devices for helping disabled people
to recover their mobility. The actuator functions as motor, clutch, and brake. In the design, magnetorheological (MR)
fluids are utilized to generate controllable torque. To decrease the size of the actuator, motor and MR fluids are
integrated. MR fluids are filled inside the DC motor based actuator. Additional design factors of smart actuators
including influence of permanent magnet on MR fluids and dynamic sealing are also considered. Finite element model of
the smart actuator is built and analyzed. A prototype of the smart actuator with two different inner armatures is fabricated
and their characteristics are investigated. Torques are compared between simulation and experiments. The results show
that the developed smart actuator with multiple functions is promising for assistive knee braces.
Advanced control techniques for post-buckled precompressed (PBP) flight control actuators
Show abstract
The dynamic response of a new class of flight control actuators that rely on post-buckled precompressed (PBP)
piezoelectric elements is investigated. While past research has proven that PBP actuators are capable of generating
deflections three times higher than conventional bimorph actuators, this paper quantifies the work output and power
consumption under various axial loads, at various frequencies. An analytical model is presented that supports the
experimental findings regarding the increasing work output and natural frequency shift under increasing axial loads.
Furthermore, increasing axial loads shows an increase in open-loop piezoelectric hysteresis, resulting in an increasing
phase lag in actuator response. Current measurements show an electromechanical coupling that leads to power peaks
around the natural frequency. Increasing axial loads has no effect on the power consumption, while increasing the work
output by a factor of three, which implies a significant increase in work density over the piezoelectric material itself.
Optimization of thermoelectric modules based on Mg-Si system
Show abstract
Design of thermoelectric modules based on Mg2Si alloy is presented here. Mg2Si based TE material
has highest specific figure of merit (ZT/ρ) thus best suited for airborne applications. The cost of
Mg2Si based TE modules are much lower than that of super latticed based TE materials and their
modules.
Passive and Active Vibration I
Low energy multimodal semi-active control minimizing the number of transducers
Show abstract
The new proposed method is the hybridization between SSDI techniques and active methods developed for modal active
control such as time sharing control and modal observer in order to control several modes of a structure with a good
performance but without operative energy. It is designed in order to minimize the number of control components. The
principal application field is the transportation.
It is based on several modal SSDI controllers which act on the same actuator voltage. They are synchronized on each
extremum of the corresponding modal displacement. Modal displacements are reconstructed thanks to a modal model of
the smart structure from a modal observer. In order to reduce the number of actuators, the time sharing method is adapted
to SSDI techniques: all the modal SSDI are connected to the same piezoelectric actuator, but only one controller is
selected to control the voltage inversion for each step time. In order to select modal SSDI controller having the most
effective action for damping, a computation of modal energies is realized from the estimated modal state. A controller
selector is used to connect the modal SSDI command, whose corresponding mode has the highest modal energy [6], to
the switch trigger.
An application on a smart clamped free beam including one actuator and two sensors is presented. Three modes are
controlled and the modal responses are observed on five modes. The results show that the control reduces significantly
the vibration of targeted modes. Moreover, the method is not subject to stability problems.
Enhanced piezoelectric voltage build-up for semi-active control of smart structures
Show abstract
This paper presents a combination of the SSD (Synchronized Switch Damping) semi-active control and techniques
developed for active control. The principle of modal SSDI is to synchronize the piezoelectric voltage inversion or
switching with the extremum of the targeted mode modal displacement. This modal displacement is estimated even in
the case of complex, broadband or noisy excitation with a modal observer. The switching process control induces a non
linear processing of the piezoelectric voltage which results in a cumulative self generated control voltage in phase with
the mode speed, thus generating an important damping of the targeted mode. This voltage self building is optimal if the
piezoelectric voltage is maximum when the modal displacement of the targeted mode is extremum. But in the case of
complex excitation or when the targeted mode amplitude is lower than higher modes, the performances are altered. The
proposed method consists in implementing a decision algorithm allowing waiting for the next voltage extremum before
to trig the voltage inversion, the whole process being globally synchronized with the targeted modal displacement.
Indeed, the targeted mode amplitude is reduced by using part of the energy of the higher modes which enhances the build
up of the self generated piezoelectric control voltage. Simulations carried out on a clamped free beam are presented.
Results obtained first with a bimodal excitation then in the case of pulse excitation demonstrates a large increase of the
damping on the targeted mode.
Hybrid active/semi-active modal control of smart structures
Show abstract
Smart structures controlled by active algorithms proved their high efficiency. But active control requires external
energy and heavy amplifier which strongly limit the applications in the transportation field. An alternative to
active control is given by semi-active control which does not require operative energy but which is less efficient
than active control. The proposed hybrid control associates the active control with semi-active control in order
to benefit from the respective advantages of both methods. This hybrid control is intended to control vibration
modes with the same performances than active control while reducing significantly the operative energy.
An application on the second mode of clamped-free smart beam is presented. The results show that this new
control approach appears to be able to decrease the required external energy and to reduce the power and
consequently the weight of the active control amplifiers while maintaining the same damping performances. This
control can be used, for example, in the transportation field to improve the lifetime of systems which use smart
structure.
Light weight polarized polypropylene foam for noise shielding
Show abstract
The high levels of noise generated during launch can destroy sensitive equipment on space craft.
Passive damping systems, like acoustic blankets, work to reduce the high frequency noise but do
little to the low frequency noise (<400 Hz). While wall mounted transducers can reduce the low
frequency noise during a launch, they also can create areas of higher increased sound pressure in
the payload fairings. Ferroelectret cellular polymer foams with high piezoelectric coupling
constants are being used as new types of actuators and sensors. Further impedance control
through the inverse piezoelectric effect will lead to a new "semi-active" approach that will reduce
low frequency noise levels. Combining layers of conventional nonpiezoelectric foam and
ferroelectret materials with a multiple loop feedback system will give a total damping effect that is
adaptable over a wide band of low frequencies. This paper covers the manufacturing methods that
were used to make polarized polypropylene foam, to test the foam for its polarized response and
its noise shielding ability.
Corrosion-enabled powering approach for structural health monitoring sensor networks
Show abstract
Structural health monitoring consists of an integrated paradigm of sensing, data interrogation, and statistical modeling
that results in a strategy to assess the performance of a structure. Sensor networks play a central role in this paradigm, as
such networks typically perform much of the actuation, data acquisition, information management, and even local
computing necessary to enable the overall implementation of the strategy, increasingly in a wireless mode. In many
applications power provision can become a limiting factor, as the conventional strategy for wireless networks is a
battery. However, batteries require replacement, as their useful shelf lives often do not exceed the intended service of
their host structures.
Energy harvesting has emerged as a class of potential network powering solutions whereby one form of energy available
on the structure is harvested and converted to useful electrical energy. The objective of this work is to investigate the
harvesting of energy from galvanic corrosion that typically occurs naturally in many structures. Specifically, this study
considers corrosion between magnesium and graphite rods embedded in a concrete structure immersed in seawater. The
energy was evaluated by connecting a .1F capacitor and measuring the voltage charge over finite time intervals during
the corrosion process. A carbon fiber admixture was introduced to the concrete host to improve electrical conductivity,
and the power increase was calculated from voltage measurements. The investigation concludes that the voltage levels
achieved may be naturally integrated with a booster circuit to provide CMOS voltage levels suitable for sensor network
powering in some applications.
Passive and Active Vibration II
Active vibration cancellation of tonal disturbance using orthogonal eigenstructure control
Show abstract
Orthogonal Eigenstructure Control (OEC) is a novel control method that can be used for active vibration
cancellation. OEC is an output feedback control method applicable to multiple-input, multiple-output linear
systems. In this paper, application of OEC for active vibration cancellation in a plate is presented. A steel
plate clamped at four edges is used as a test plate and piezoelectric actuators are used as control actuators.
Accelerometers are used for measuring the acceleration and displacement at ten locations on the plate. A
tonal disturbance with a frequency of 150 Hz is applied to the plate by an electromagnetic actuator. After
identification of the state-space model of the plate, orthogonal eigenstructure control is used to find the
control gains that decouple the modes of vibrations and reduce transferring of vibrational energy between
them. The results show significant vibration suppression throughout the plate.
Pushover analysis method for asymmetric structure with passive energy dissipation devices
Show abstract
This paper presents a simplified method to calculate pushover curves for an asymmetric structure with
displacement-dependent passive energy dissipation devices (DDPEDDs). The deformations of a symmetric
structure are analyzed in translation and torsion, respectively. These results are then combined in order to
calculate the pushover curve for an asymmetric structure with DDPEDDs. The numerical results obtained
by using the simplified analytical method are then compared to those obtained from the analysis of the
models using the software SAP2000. The results show that the simplified analytical method can be an
effective tool for engineering analysis of an asymmetric structure.
Full scale tests of all-steel buckling restrained braces
Show abstract
Buckling-restrained braces (BRBs) are widely used seismic response-controlling members with excellent energy
dissipation capacity without buckling at design deformation. However, the property of all-steel BRBs with cruciform
cross section encased in a square steel tube remains insufficiently studied. In this paper, the properties of this kind of
BRBs, which were used in two office buildings in Beijing, were examined by full-scale test. First, initial design was
done according to the client's requirement. Then, two full-scale specimens were tested under uniaxial quasi-static cyclic
loading. The test results indicate that there should be no welding in yielding portion of the core. Finally, the full-scale
subassemblage test was done with an improved BRB and gusset plates installed in a frame. The result shows that the
brace exhibited high energy dissipation capacity and stable hysteretic characteristic. According to the results from above
tests, some important issues are summarized to provide advices for practical applications.
Passive and Active Vibration III
Torsionally coupled vibration control of eccentric buildings using liquid dampers
Show abstract
This paper focus on the seismic response control of eccentric structures using tuned liquid column dampers (TLCD) and
circular tuned liquid column dampers (CTLCD). An 8-story eccentric steel building, with two TLCDs on the orthogonal
direction and one CTLCD on the mass center of the top story, is analyzed. The optimal parameters of liquid dampers are
optimized by Genetic Algorithm. The structural response with and without liquid dampers under bi-directional
earthquakes are calculated. The results show that the torsionally coupled response of structures can be effectively
suppressed by use of liquid dampers with optimal parameters.
Modal analysis and vibration control of smart hull structure in underwater
Show abstract
Many research works have been conducted to investigate active vibration control of underwater structure using
piezoelectric materials for the possible applications in the underwater vehicles and seashore structures. Recently,
advanced anisotropic piezoceramic actuator named as Macro Fiber Composite (MFC) was developed in NASA Langley
Research Center. MFC actuator is consisting of rectangular piezoceramic fibers and interdigitated electrode, which can
provide great flexibility, large induced strain and directional actuating force. In this paper, vibration control performance
of underwater smart hull structure with MFC actuator is evaluated. As a first step, dynamic modeling of underwater hull
structure is conducted by using finite element technique and then modal characteristics of hull structure are investigated.
For the verification of the proposed finite element model, numerical results of modal analysis are compared with those of
experimental modal test results. In order to evaluate vibration control performance, linear quadratic Gaussian (LQG)
controller is designed and experimentally implemented to the system. Control responses are evaluated in the water tank
and presented in both time and frequency domain.
Passive and Active Vibration IV
Design and analysis of an adaptive vibration isolation system considering large scale parameter variations
Show abstract
The reliability assessment of complex adaptive systems requires the identification of dominant input parameters and the
quantitative evaluation of the associated effects on the system performance. This can be achieved using experimental and
numerical sensitivity analysis methods. In this paper a simulation based approach is presented, assessing the system
performance of an active vibration isolation device with respect to parameter variations, such as temperature, load
amplitude, material properties and geometry dimensions of the structural elements. The modeling of the active system is
described utilizing the Finite Element Method and a Krylov Subspace based model order reduction scheme. The
implemented Morris screening technique and variance based sensitivity analysis are discussed. For the example of an
active vibration system the sensitivity analysis strategy is outlined and it is shown that a quantitative assessment of the
system performance considering large scale parameter variations is provided.
Genetic algorithm-based multi-objective optimal absorber system for three-dimensional seismic structures
Show abstract
The problem of optimizing an absorber system for three-dimensional seismic structures is addressed. The objective is to
determine the number and position of absorbers to minimize the coupling effects of translation-torsion of structures at
minimum cost. A procedure for a multi-objective optimization problem is developed by integrating a dominance-based
selection operator and a dominance-based penalty function method. Based on the two-branch tournament genetic
algorithm, the selection operator is constructed by evaluating individuals according to their dominance in one run. The
technique guarantees the better performing individual winning its competition, provides a slight selection pressure
toward individuals and maintains diversity in the population. Moreover, due to the evaluation for individuals in each
generation being finished in one run, less computational effort is taken. Penalty function methods are generally used to
transform a constrained optimization problem into an unconstrained one. The dominance-based penalty function contains
necessary information on non-dominated character and infeasible position of an individual, essential for success in
seeking a Pareto optimal set. The proposed approach is used to obtain a set of non-dominated designs for a six-storey
three-dimensional building with shape memory alloy dampers subjected to earthquake.
Exploration of nonlinear shunting strategies as effective vibration absorbers
Show abstract
The tuned mass damper (TMD) is a simple and efficient device, but it is only effective when it is precisely
tuned to the frequency of a particular vibration mode. In order to overcome this limitation, the nonlinear energy
pumping phenomenon from a main mechanical structure to a local, passive nonlinear energy sink (NES) is
investigated. Unlike the TMD, an NES has no preferential resonant frequency, which makes it a good candidate
for vibration mitigation of MDOF linear and nonlinear vibrating structures. However, in addition to the rattle
space requirements, the mechanical implementation of the nonlinear absorber poses serious challenges. This
is why piezoelectric shunting is considered in this study. Specifically, the objective of the paper consists in
developing a suitable association of piezoelectric patches and nonlinear shunted electrical circuits so that the
effects of the NES would be electrically reproduced.
Vibration suppression of satellites using multifunctional platforms
Show abstract
This research focuses on a finite element analysis of active vibration suppression capabilities of a smart
composite platform, which is a structural interface between a satellite main thruster and its structure and
possesses simultaneous precision positioning and vibration suppression capabilities for thrust vector control
of a satellite. First, the combined system of the smart composite platform and the satellite structure are
briefly described followed by the finite element modeling and simulations. The smart platform
piezoelectric patches and stacks material properties modeling, for the finite element analysis, are developed
consistent with the manufacturer data. Next, a vibration suppression scheme, based on the modal analysis,
is presented and used in vibration suppression analysis of satellite structures of the thrust vector under the
thruster-firing excitation. The approach introduced here is an effective technique for the design of smart
structures with complex geometry to study their MIMO active vibration suppression capabilities.
Passive and Active Vibration V
Precision tracking control of dual-stage actuation system for optical manufacturing
Show abstract
Actuators with high linear motion speed, high positioning resolution and long motion stroke are needed in many
precision machining systems. In some current systems, voice coil motors (VCMs) are implemented for servo control.
While the voice coil motors may provide long motion stroke needed in many applications, the main obstacle that hinders
the improvement of the machining accuracy and efficiency is its limited bandwidth. To fundamentally solve this issue,
we propose to develop a dual-stage actuation system that consists of a voice coil motor that covers the coarse motion and
a piezoelectric stack actuator that induces the fine motion to enhance the positioning accuracy. A flexure hinge-based
mechanism is developed to connect these two actuators together. A series of numerical and experimental studies are
carried out to facilitate the system design and preliminary control development.
Nonlinear decentralized control of seismically excited civil structures
Show abstract
The dynamic behaviour of civil structures under strong earthquakes is usually nonlinear or inelastic. Conventional
control approach is almost based on linear theory, such as the linear quadratic regulator (LQR) design. One of the
common characteristics shared by seismically excited civil structures is a distinct subsystem property, which indicates
there are only several floors of civil structures with nonlinear or inelastic vibration and the other with linear vibration. In
this study, a robust control approach combining decentralized control with adaptive fuzzy control is proposed to treat the
nonlinear control for civil structures. The structural system is decomposed into several artificially subsystems, while the
different subsystem is adopted the corresponding control algorithm. The input-to-state stability of the entire system can
be guaranteed by the proposed control method, and an H infinity performance is achieved through a subsystem with the
proposed controller. Numerical examples are presented to demonstrate the effectiveness and robustness of the proposed
controller.
Study of shear-mode piezoelectric patch/complete layer in smart laminated shell panels
Show abstract
Finite element solution is presented for finitely long, simply-supported, orthotropic, piezoelectric shell panel under
pressure and electrostatic excitation. The influence of the piezoelectric layers on the mechanical behavior of structures is
studied. The direct piezoelectric effect of the piezoelectric material in ordinary (normal) and shear mode application are
investigated. Numerical examples are presented for [0/90/P] laminations, where P indicates the piezoelectric layer.
Piezoelectric layer can be completed or patch form. Finally the results are compared together and the shear mode
advantages are discussed.