Share Email Print

Proceedings Paper

The E-beam resist test facility: performance testing and benchmarking of E-beam resists for advanced mask writers
Author(s): Matt Malloy; Il Yong Jang; Mac Mellish; Lloyd C. Litt; Ananthan Raghunathan; John Hartley
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

With each new generation of e-beam mask writers comes the ability to write leading edge photomasks with improved patterning performance and increased throughput. However, these cutting-edge e-beam tools are often used with older generation resists, preventing the end-user from taking full advantage of the tool’s potential. The generation gap between tool and resist will become even more apparent with the commercialization of multi-beam mask writers, which are expected to be available for pilot line use around 2015. The mask industry needs resists capable of meeting the resolution, roughness, and sensitivity requirements of these advanced tools and applications.

The E-beam Resist Test Facility (ERTF) has been established to fill the need for consortium-based testing of e-beam resists for mask writing applications on advanced mask writers out to the 11nm half-pitch node and beyond. SEMATECH and the College of Nanoscale Science and Engineering (CNSE) began establishing the ERTF in early 2012 to test e-beam resist samples from commercial suppliers and university labs against the required performance metrics for each application at the target node. Operations officially began on June 12, 2012, at which time the first e-beam resist samples were tested. The ERTF uses the process and metrology infrastructure available at CNSE, including a Vistec VB300 Vectorscan e-beam tool adjusted to operate at 50kv. Initial testing results show that multiple resists already meet, or are close to meeting, the resolution requirements for mask writing at the 11nm node, but other metrics such as line width roughness still need improvement.

An overview of the ERTF and its capabilities is provided here. Tools, baseline processes, and operation strategy details are discussed, and resist testing and benchmarking results are shown. The long-term outlook for the ERTF and plans to expand capability and testing capacity, including resist testing for e-beam direct write lithography, are also discussed.

Paper Details

Date Published: 8 November 2012
PDF: 9 pages
Proc. SPIE 8522, Photomask Technology 2012, 85220N (8 November 2012); doi: 10.1117/12.978665
Show Author Affiliations
Matt Malloy, SEMATECH (United States)
Il Yong Jang, SEMATECH (United States)
Mac Mellish, SEMATECH (United States)
Lloyd C. Litt, SEMATECH (United States)
Ananthan Raghunathan, College of Nanoscale Science & Engineering (United States)
John Hartley, College of Nanoscale Science & Engineering (United States)

Published in SPIE Proceedings Vol. 8522:
Photomask Technology 2012
Frank E. Abboud; Thomas B. Faure, Editor(s)

© SPIE. Terms of Use
Back to Top
Sign in to read the full article
Create a free SPIE account to get access to
premium articles and original research
Forgot your username?