Share Email Print
cover

Proceedings Paper

Understanding the impact of CD-SEM artifacts on metrology via experiments and simulations
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Scanning Electron Microscopy (SEM) is widely used to measure Critical Dimensions (CD) in semiconductor lithography processes. Correlation between the CD-SEM metrology and target profile has drawing attention from metrology community [1]. In this paper, we use a recently developed CD-SEM simulator [2-3] to investigate some artifacts of SEM metrology. The simulation consists of two parts. First part is a stochastic resist modeling for lines and spaces through pitch, exposure dose and focus. Second part is CD-SEM simulation. Both CD and LWR extracted from experimental CD-SEM images were used to train the SEM model. Two types of artifacts were found to be metrology dependent: the first artifact is that a CD-SEM measures CD at various heights across pitch for the same SEM threshold. The second artifact is a misleading CD measurement for trenches not fully developed. By overlapping the CD-SEM simulation with 3D lithography simulation, correlation between CD-SEM metrology and target 3D profile is studied. Finally, a Process Window (PW) analysis based on both experiment and simulation is presented, using the simulated features and SEM images to correct the experimental PW.

Paper Details

Date Published: 19 March 2015
PDF: 12 pages
Proc. SPIE 9424, Metrology, Inspection, and Process Control for Microlithography XXIX, 94242A (19 March 2015); doi: 10.1117/12.2087106
Show Author Affiliations
Chao Fang, KLA-Tencor Texas (United States)
Alessandro Vaglio Pret, KLA-Tencor Corp. (United States)
Mark D. Smith, KLA-Tencor Corp. (United States)
John J. Biafore, KLA-Tencor Corp. (United States)
Stewart A. Robertson, KLA-Tencor Corp. (United States)
Joost Bekaert, IMEC (Belgium)


Published in SPIE Proceedings Vol. 9424:
Metrology, Inspection, and Process Control for Microlithography XXIX
Jason P. Cain; Martha I. Sanchez, Editor(s)

© SPIE. Terms of Use
Back to Top