Share Email Print

Proceedings Paper

Extracting full-field dynamic strain response of a rotating wind turbine using photogrammetry
Author(s): Javad Baqersad; Peyman Poozesh; Christopher Niezrecki; Peter Avitabile
Format Member Price Non-Member Price
PDF $17.00 $21.00

Paper Abstract

Health monitoring of wind turbines is typically performed using conventional sensors (e.g. strain-gages and accelerometers) that are usually mounted to the nacelle or gearbox. Although many wind turbines stop operating due to blade failures, there are typically few to no sensor mounted on the blades. Placing sensors on the rotating parts of the structure is a challenge due to the wiring and data transmission constraints. Within the current work, an approach to monitor full-field dynamic response of rotating structures (e.g. wind turbine blades or helicopter rotors) is developed and experimentally verified. A wind turbine rotor was used as the test structure and was mounted to a block and horizontally placed on the ground. A pair of bearings connected to the rotor shaft allowed the turbine to freely spin along the shaft. Several optical targets were mounted to the blades and a pair of high-speed cameras was used to monitor the dynamics of the spinning turbine. Displacements of the targets during rotation were measured using three-dimensional point tracking. The point tracking technique measured both rigid body displacement and flexible deformation of the blades at target locations. While the structure is rotating, only flap displacements of optical targets (displacements out of the rotation plane) were used in strain prediction process. The measured displacements were expanded and applied to the finite element model of the turbine to extract full-field dynamic strain on the structure. The proposed approach enabled the prediction of dynamic response on the outer surface as well as within the inner points of the structure where no other sensor could be easily mounted. In order to validate the proposed approach, the predicted strain was compared to strain measured at four locations on the spinning blades using a wireless strain-gage system.

Paper Details

Date Published: 1 April 2015
PDF: 10 pages
Proc. SPIE 9437, Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure 2015, 94371O (1 April 2015); doi: 10.1117/12.2084633
Show Author Affiliations
Javad Baqersad, Univ. of Massachusetts Lowell (United States)
Peyman Poozesh, Univ. of Massachusetts Lowell (United States)
Christopher Niezrecki, Univ. of Massachusetts Lowell (United States)
Peter Avitabile, Univ. of Massachusetts Lowell (United States)

Published in SPIE Proceedings Vol. 9437:
Structural Health Monitoring and Inspection of Advanced Materials, Aerospace, and Civil Infrastructure 2015
Peter J. Shull, Editor(s)

© SPIE. Terms of Use
Back to Top