The Moscone Center
San Francisco, California, United States
27 January - 1 February 2018
Conference 10520
Laser-based Micro- and Nanoprocessing XII
Tuesday - Thursday 30 January - 1 February 2018
Conference
Committee
show | hide
Tuesday 30 January Show All Abstracts
Session 1:
Laser Micro Structuring and Processing I
Tuesday 30 January 2018
8:00 AM - 10:00 AM
Location: Room 155 (South Mezzanine)
Increasing the throughput in microprocessing with ultrafast lasers: an industrial perspective (Invited Paper)
Paper 10520-1
Time: 8:00 AM - 8:30 AM
Author(s):
Show Abstract
New laser slicing technology named KABRA process enables high speed and high efficiency SiC slicing (Invited Paper)
Paper 10520-2
Time: 8:30 AM - 9:00 AM
Author(s):
Show Abstract
Stealth Dicing technology with SWIR laser realizing high throughput Si wafer dicing
Paper 10520-3
Time: 9:00 AM - 9:20 AM
Author(s):
Show Abstract
Laser ablation of silicon wafers: New findings, new insights (Conference Presentation)
Paper 10520-4
Time: 9:20 AM - 9:40 AM
Author(s):
Show Abstract
Femtosecond laser direct writing of Cu-based fine patterns using Cu2O nanospheres
Paper 10520-5
Time: 9:40 AM - 10:00 AM
Author(s):
Show Abstract
Coffee Break 10:00 AM - 10:30 AM
Session 2:
Laser Micro Structuring and Processing II
Tuesday 30 January 2018
10:30 AM - 12:00 PM
Location: Room 155 (South Mezzanine)
Direct laser writing of 3D microfluidic structures in glass for lab-on-a-chip applications (Invited Paper)
Paper 10520-6
Time: 10:30 AM - 11:00 AM
Author(s):
Show Abstract
Application of 400-W laser MicroJet for high-throughput and low-Impact micro-structuring of aerospace and tooling industry parts (Conference Presentation)
Paper 10520-7
Time: 11:00 AM - 11:20 AM
Author(s):
Show Abstract
Improving femtosecond glass cutting using programmable spatial light modulators
Paper 10520-8
Time: 11:20 AM - 11:40 AM
Author(s):
Show Abstract
Incubation effect in burst mode fs-laser ablation of stainless steel samples
Paper 10520-9
Time: 11:40 AM - 12:00 PM
Author(s):
Show Abstract
Lunch/Exhibition Break 12:00 PM - 1:30 PM
Session 3:
Laser Micro/Nano Structuring on Flexible Substrates
Tuesday 30 January 2018
1:30 PM - 3:30 PM
Location: Room 155 (South Mezzanine)
Laser microstructured diamond electrode arrays for bionic eye applications (Conference Presentation) (Invited Paper)
Paper 10520-10
Time: 1:30 PM - 2:00 PM
Author(s):
Show Abstract
Nanoablation of Si surface with femtosecond-laser-induced plasmonic near-fields (Invited Paper)
Paper 10520-11
Time: 2:00 PM - 2:30 PM
Author(s):
Show Abstract
Direct observation of internal void formations in Stealth Dicing
Paper 10520-12
Time: 2:30 PM - 2:50 PM
Author(s):
Show Abstract
Solvent induced reversible deformations of polymeric 3D microstructures for actuation and sensing applications
Paper 10520-13
Time: 2:50 PM - 3:10 PM
Author(s):
Show Abstract
Flexible and stretchable micro GO/rGO optical structures by femtosecond laser photoreduction
Paper 10520-14
Time: 3:10 PM - 3:30 PM
Author(s):
Show Abstract
Coffee Break 3:30 PM - 4:00 PM
Session 4:
High-speed Laser Beam Engineering Systems for High-power, Ultrashort Pulsed Lasers
Tuesday 30 January 2018
4:00 PM - 5:00 PM
Location: Room 155 (South Mezzanine)
Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams
Paper 10520-16
Time: 4:00 PM - 4:20 PM
Author(s):
Show Abstract
Ultrafast z-scanning for high efficiency laser material processing (Conference Presentation)
Paper 10520-17
Time: 4:20 PM - 4:40 PM
Author(s):
Show Abstract
Parallel processing of embossing dies with ultrafast lasers
Paper 10520-18
Time: 4:40 PM - 5:00 PM
Author(s):
Show Abstract
Session Tue:
Posters-Tuesday
Tuesday 30 January 2018
6:00 PM - 8:00 PM
Location: Moscone West Level 2 & 3

Conference attendees are invited to attend the LASE poster session on Tuesday evening. Come view the posters, enjoy light refreshments, ask questions, and network with colleagues in your field. Authors of poster papers will be present to answer questions concerning their papers. Attendees are required to wear their conference registration badges to the poster sessions. Poster authors, view poster presentation guidelines and set-up instructions at http://spie.org/PWPosterGuidelines.
Accelerated ultra-fast ablation using dual wavelength pulsed time delay
Paper 10520-19
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Laser interference lithography on non-planar surface for roll-to-roll process
Paper 10520-24
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Improving piezo actuators for nanopositioning tasks
Paper 10520-52
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Laser ablation in water for Sn-based nanomaterials synthesis by millisecond-pulsed laser
Paper 10520-53
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Femtosecond laser-assisted etching: making arbitrary shaped 3D glass micro-structures
Paper 10520-54
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Controlling the morphology of the conjugated polymer film by single shot process of femtosecond laser
Paper 10520-55
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Formation mechanism of self-assembled polarization-dependent periodic nanostructures in β-Ga2O3
Paper 10520-57
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Local temperature measurement during ultrafast laser 3D nanolithography writing
Paper 10520-58
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Nano- and micro-structuring of fused silica using time-delay adjustable double flash ns-laser radiation
Paper 10520-59
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Femtosecond laser inscribed cladding waveguides in aminoacid crystals
Paper 10520-60
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Durable superhydrophobic-superoleophilic copper mesh fabricated by pulsed laser ablation for oil/water separation
Paper 10520-61
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Three-dimensional micro-nano-hierarchical porous structures based on the deposition of the ablated material by picosecond pulses
Paper 10520-62
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Pulsed laser micro-scribing of copper thin films on polyimide substrate in NaCl solution
Paper 10520-63
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
On the strength of toughened multimedia glass exposed to fs laser for inscription of photonics circuits
Paper 10520-64
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
An experimental study of the ultrafast microcutting process of thin stainless steel sheets
(Canceled)
Paper 10520-66
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Dynamics of thermally generated microbubbles
Paper 10520-67
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Laser pre-exposure to mitigate damage on microparticle-contaminated fused silica surface in high power laser systems
Paper 10520-68
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
High throughput low CoO, and damage free laser doping method for poly-Si thin films using KrF excimer laser
Paper 10520-69
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Optimization of femtosecond laser micromachining of polylactide and PLLA/HAp composite
Paper 10520-70
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Degradation of poly(L-lactide) under femtosecond laser treatment
Paper 10520-71
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Experimental investigation of texturing complex geometry using high repetition nano laser and comparison with the simulated COMSOL model
Paper 10520-72
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Innovative approaches for coordinate extraction of curved shape and analyzing the effect of process parameters on the quality of the laser micro-machined surface
Paper 10520-73
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Stainless steel film processing for confocal microscope pinhole using femtosecond laser
Paper 10520-75
Time: 6:00 PM - 8:00 PM
Author(s):
Show Abstract
Wednesday 31 January Show All Abstracts
Session 5:
Large-area Micro/Nano Structuring and Laser Interference Patterning
Wednesday 31 January 2018
8:20 AM - 9:50 AM
Location: Room 155 (South Mezzanine)
R2R fabrication of freeform micro-optics (Conference Presentation) (Invited Paper)
Paper 10520-20
Time: 8:20 AM - 8:50 AM
Author(s):
Show Abstract
Optimization for high speed surface processing of metallic surfaces utilizing direct laser interference patterning
Paper 10520-21
Time: 8:50 AM - 9:10 AM
Author(s):
Show Abstract
2D laser induced periodic surface structures with double cross-polarized pulses
Paper 10520-22
Time: 9:10 AM - 9:30 AM
Author(s):
Show Abstract
Double pulse explosion drilling of transparent materials
Paper 10520-23
Time: 9:30 AM - 9:50 AM
Author(s):
Show Abstract
Coffee Break 9:50 AM - 10:20 AM
Session Plen:
LASE Plenary Session
Wednesday 31 January 2018
10:20 AM - 12:35 PM
Location: Room 21 (North Exhibit Level)

10:20 am: Welcome and Opening Remarks
Koji Sugioka, RIKEN (Japan) and Reinhart Poprawe, Fraunhofer-Institut für Lasertechnik (Germany)

10:25 am: Announcement of the 3D Printing, Fabrication, and Manufacturing Best Paper Award
Henry Helvajian, The Aerospace Corp. (United States)

10:30 am: Announcement of the Harold E. Edgerton Award, given to Sterling J. Backus, Kapteyn-Murnane Labs., Inc. (United States)
Gigahertz Laser Frequency Combs and Dual-Comb Spectroscopy (Plenary Presentation)
Paper 10515-201
Time: 10:35 AM - 11:15 AM
Author(s):
Show Abstract
Optical Lattice Clocks: Reading the 18th Decimal Place of Frequency (Plenary Presentation)
Paper 10515-202
Time: 11:15 AM - 11:55 AM
Author(s):
Show Abstract
Advanced industrial laser systems and applications (Plenary Presentation)
Paper 10525-203
Time: 11:55 AM - 12:35 PM
Author(s):
Show Abstract
Lunch/Exhibition Break 12:35 PM - 2:00 PM
Session 6:
Direct-write Processing, Ablation, and Surface Modification I
Wednesday 31 January 2018
2:00 PM - 3:20 PM
Location: Room 155 (South Mezzanine)
Applications of ultrafast laser direct writing: from polarization control to data storage (Invited Paper)
Paper 10520-25
Time: 2:00 PM - 2:30 PM
Author(s):
Show Abstract
Laser direct writing of biocompatible hydrogels using a blister assisted approach with thick polyimide layers (Conference Presentation) (Invited Paper)
Paper 10520-26
Time: 2:30 PM - 3:00 PM
Author(s):
Show Abstract
Laser direct writing of reduced graphene oxide micropatterns and sensor applications
Paper 10520-27
Time: 3:00 PM - 3:20 PM
Author(s):
Show Abstract
Coffee Break 3:20 PM - 3:50 PM
Session 7:
Laser Micro/Nano Structuring on Metals
Wednesday 31 January 2018
3:50 PM - 6:00 PM
Location: Room 155 (South Mezzanine)
Towards high-speed controllable fabrication of micro/nano structures on material surfaces by femtosecond laser pulses (Invited Paper)
Paper 10520-28
Time: 3:50 PM - 4:20 PM
Author(s):
Show Abstract
High repetition frequency micro hole drilling of metal foils using ultrashort pulse laser radiation
Paper 10520-29
Time: 4:20 PM - 4:40 PM
Author(s):
Show Abstract
Characteristics of micro-holes drilled in ambient air and vacuum by high-power Nd:YAG laser
Paper 10520-30
Time: 4:40 PM - 5:00 PM
Author(s):
Show Abstract
Drilling progress of deep holes in tool steel using high energy picosecond laser pulses (Conference Presentation)
(Canceled)
Paper 10520-31
Time: 5:00 PM - 5:20 PM
Author(s):
Show Abstract
R2R suitable processing of large area organic electronics with integrated barrier layer using short-pulsed lasers
Paper 10520-76
Time: 5:00 PM - 5:20 PM
Author(s):
Show Abstract
Formation of two-way shape memory effect in NiTi alloy using pulsed laser irradiation
Paper 10520-32
Time: 5:20 PM - 5:40 PM
Author(s):
Show Abstract
Development of AISI 316L stainless steel coronary stent
Paper 10520-33
Time: 5:40 PM - 6:00 PM
Author(s):
Show Abstract
Thursday 1 February Show All Abstracts
Session 8:
Direct-write Processing, Ablation, and Surface Modification II
Thursday 1 February 2018
8:20 AM - 10:00 AM
Location: Room 155 (South Mezzanine)
New fast galvo scanner head for high throughput micromachining
Paper 10520-34
Time: 8:20 AM - 8:40 AM
Author(s):
Show Abstract
Low energy sub-micron laser machining using photonic nanojet with shaped optical fiber tip (Conference Presentation)
Paper 10520-35
Time: 8:40 AM - 9:00 AM
Author(s):
Show Abstract
Microfabrication of curved sidewall grooves using scanning nanosecond excimer laser ablation
(Canceled)
Paper 10520-37
Time: 9:00 AM - 9:20 AM
Author(s):
Show Abstract
Model for ultrafast laser micromachining
Paper 10520-38
Time: 9:20 AM - 9:40 AM
Author(s):
Show Abstract
The effect of intermittent irradiation in laser drilling of metal in high pressure carbon dioxide
Paper 10520-39
Time: 9:40 AM - 10:00 AM
Author(s):
Show Abstract
Coffee Break 10:00 AM - 10:30 AM
Session 9:
Advanced 1D to 3D Subtractive and Additive Processes
Thursday 1 February 2018
10:30 AM - 11:50 AM
Location: Room 155 (South Mezzanine)
Combining direct-write laser lithography, 3D printing, and injection molding for the fabrication of complex 3D optical system components (Invited Paper)
Paper 10520-40
Time: 10:30 AM - 11:00 AM
Author(s):
Show Abstract
Direct writing of three-dimensional Cu-based sensors using femtosecond laser reduction of CuO nanoparticles (Invited Paper)
Paper 10520-41
Time: 11:00 AM - 11:30 AM
Author(s):
Show Abstract
Laser printing and sintering of Zn nanoparticles for bioresorbable electronics (Conference Presentation)
Paper 10520-42
Time: 11:30 AM - 11:50 AM
Author(s):
Show Abstract
Lunch/Exhibition Break 11:50 AM - 1:50 PM
Session 10:
Advanced Laser Structuring for Energy Storage and Conversion I
Thursday 1 February 2018
1:50 PM - 3:00 PM
Location: Room 155 (South Mezzanine)
Three-dimensional elemental imaging of Li-ion batteries using ultrafast laser ablation optical emission spectroscopy (Invited Paper)
Paper 10520-45
Time: 1:50 PM - 2:20 PM
Author(s):
Show Abstract
Laser direct writing for energy storage and integrated wireless devices
Paper 10520-46
Time: 2:20 PM - 2:40 PM
Author(s):
Show Abstract
Laser in battery manufacturing: impact of intrinsic and artificial electrode porosity on chemical degradation and battery lifetime
Paper 10520-47
Time: 2:40 PM - 3:00 PM
Author(s):
Show Abstract
Coffee Break 3:00 PM - 3:30 PM
Session 11:
Advanced Laser Structuring for Energy Storage and Conversion II
Thursday 1 February 2018
3:30 PM - 4:50 PM
Location: Room 155 (South Mezzanine)
Laser micro-spot welding of AISI 302 stainless steel sheets
Paper 10520-48
Time: 3:30 PM - 3:50 PM
Author(s):
Show Abstract
Modeling of a VMJ PV array under Gaussian high intensity laser power beam condition
Paper 10520-49
Time: 3:50 PM - 4:10 PM
Author(s):
Show Abstract
Glass light pipes for solar concentration
Paper 10520-50
Time: 4:10 PM - 4:30 PM
Author(s):
Show Abstract
In-situ analysis of laser-generated 3D Si-based anode materials for high energy lithium-ion batteries
Paper 10520-51
Time: 4:30 PM - 4:50 PM
Author(s):
Show Abstract
Back to Top