The Moscone Center
San Francisco, California, United States
27 January - 1 February 2018
Conference 10523
Laser 3D Manufacturing V
Monday - Thursday 29 January - 1 February 2018
Conference
Committee
show | hide
Monday 29 January Show All Abstracts
Session 1:
Different Views of Laser 3D Processing
Monday 29 January 2018
8:00 AM - 10:30 AM
Location: Room 23 (North Exhibit Level)
Additive manufacturing of reflective and transmissive optics: potential and new solutions for optical systems (Invited Paper)
Paper 10523-1
Time: 8:00 AM - 8:30 AM
Author(s):
Show Abstract
Stereolithographic fabrication of engineered lattice structures having non-traditional strut geometries (Invited Paper)
Paper 10523-2
Time: 8:30 AM - 9:00 AM
Author(s):
Show Abstract
Additive manufacturing: Capabilities, challenges, and future (Invited Paper)
Paper 10523-3
Time: 9:00 AM - 9:30 AM
Author(s):
Show Abstract
Development of a hybrid exposure system for lithography-based additive manufacturing technologies
Paper 10523-4
Time: 9:30 AM - 9:50 AM
Author(s):
Show Abstract
3D printing of transparent materials by selective laser etching and multi-photon polymerization in one machine
Paper 10523-5
Time: 9:50 AM - 10:10 AM
Author(s):
Show Abstract
Fiber-fed laser-heated process for printing transparent glass from single mode optical fiber
Paper 10523-6
Time: 10:10 AM - 10:30 AM
Author(s):
Show Abstract
Coffee Break 10:30 AM - 11:00 AM
Session 2:
Other Processes with Lasers
Monday 29 January 2018
11:00 AM - 12:00 PM
Location: Room 23 (North Exhibit Level)
Advances in laser peening technology and possible extension to 3D manufacturing tools (Invited Paper)
Paper 10523-7
Time: 11:00 AM - 11:30 AM
Author(s):
Show Abstract
Light controlling sound: Selective laser sintering as a tool for building aqueous acoustic metamaterials (Invited Paper)
Paper 10523-8
Time: 11:30 AM - 12:00 PM
Author(s):
Show Abstract
Lunch Break 12:00 PM - 2:00 PM
Session 3:
Microfluidic
Monday 29 January 2018
2:00 PM - 3:10 PM
Location: Room 23 (North Exhibit Level)
3D microfluidic fabrication using a low refractive index polymer for clear microscopic observation at the fluid boundary (Invited Paper)
Paper 10523-10
Time: 2:00 PM - 2:30 PM
Author(s):
Show Abstract
Dynamic programming approach to adaptive slicing for optimization under a global volumetric error constraint
Paper 10523-11
Time: 2:30 PM - 2:50 PM
Author(s):
Show Abstract
Selective laser melting of borosilicate glass using ultrashort laser pulses
Paper 10523-12
Time: 2:50 PM - 3:10 PM
Author(s):
Show Abstract
Coffee Break 3:10 PM - 3:40 PM
Session 4:
Polymers Optical Material 3D
Monday 29 January 2018
3:40 PM - 5:20 PM
Location: Room 23 (North Exhibit Level)
Complex freeform micro-optics by femtosecond laser direct writing (Invited Paper)
Paper 10523-13
Time: 3:40 PM - 4:10 PM
Author(s):
Show Abstract
Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
Paper 10523-15
Time: 4:10 PM - 4:30 PM
Author(s):
Show Abstract
Laser additive manufacturing for enhanced performance of optoelectronic devices (Conference Presentation) (Invited Paper)
Paper 10523-16
Time: 4:30 PM - 5:00 PM
Author(s):
Show Abstract
High-throughput 3D printing of customized imaging lens
Paper 10523-17
Time: 5:00 PM - 5:20 PM
Author(s):
Show Abstract
Tuesday 30 January Show All Abstracts
Session 5:
3D Laser Lithography I: Joint Session with Conferences 10523 and 10544
Tuesday 30 January 2018
8:00 AM - 10:20 AM
Location: Room 2011 (West Level 2)
Fabrication of hyperuniform disordered photonic network materials (Invited Paper)
Paper 10544-26
Time: 8:00 AM - 8:30 AM
Author(s):
Show Abstract
Multiphoton processing technologies for applications in biology and tissue engineering (Invited Paper)
Paper 10544-27
Time: 8:30 AM - 9:00 AM
Author(s):
Show Abstract
2PP-DLW in hydrogels for excitation and immobilization of living cells
Paper 10544-28
Time: 9:00 AM - 9:20 AM
Author(s):
Show Abstract
Towards a cellulose-based photoresist
Paper 10544-29
Time: 9:20 AM - 9:40 AM
Author(s):
Show Abstract
Printing structural colors via direct laser writing
Paper 10544-30
Time: 9:40 AM - 10:00 AM
Author(s):
Show Abstract
3D microfabrication of mouse and human variants of serum albumin by femtosecond laser multiphoton cross-linking
Paper 10523-18
Time: 10:00 AM - 10:20 AM
Author(s):
Show Abstract
Coffee Break 10:20 AM - 10:50 AM
Session 6:
3D Laser Lithography II: Joint Session with Conferences 10523 and 10544
Tuesday 30 January 2018
10:50 AM - 12:20 PM
Location: Room 2011 (West Level 2)
Direct laser writing of electromagnetic metasurfaces for infra-red frequency range (Invited Paper)
Paper 10544-31
Time: 10:50 AM - 11:20 AM
Author(s):
Show Abstract
Femtosecond laser-induced optical properties in silver-containing gallo-germinate heavy metal oxide glasses
Paper 10544-32
Time: 11:20 AM - 11:40 AM
Author(s):
Show Abstract
Metal and metal-composite micro-structures via direct laser writing
Paper 10544-33
Time: 11:40 AM - 12:00 PM
Author(s):
Show Abstract
Optical lithography using stimulated emission depletion
Paper 10523-19
Time: 12:00 PM - 12:20 PM
Author(s):
Show Abstract
Lunch/Exhibition Break 12:20 PM - 1:30 PM
Session 7:
Special Session: Laser Peening/Cladding
Tuesday 30 January 2018
1:30 PM - 3:30 PM
Location: Room 308 (South Level 3)
Optimizing alloys for laser additive manufacturing (Conference Presentation) (Invited Paper)
Paper 10523-20
Time: 1:30 PM - 2:00 PM
Author(s):
Show Abstract
Development of experimental station for laser shock peening at HiLASE (Invited Paper)
Paper 10523-21
Time: 2:00 PM - 2:30 PM
Author(s):
Show Abstract
Synchrotron x-ray induced real time observations of CoCr alloy layer formation by micro laser cladding
Paper 10523-23
Time: 2:50 PM - 3:10 PM
Author(s):
Show Abstract
Additive manufacturing of reflective optics: evaluating finishing methods
Paper 10523-24
Time: 3:10 PM - 3:30 PM
Author(s):
Show Abstract
Coffee Break 3:30 PM - 4:00 PM
Session 8:
Forward Transfer
Tuesday 30 January 2018
4:00 PM - 5:20 PM
Location: Room 308 (South Level 3)
Extending the printing capabilities of laser-induced forward transfer from two-dimensional patterning to direct three-dimensional printing
Paper 10523-25
Time: 4:00 PM - 4:20 PM
Author(s):
Show Abstract
Micropatterning of glassy, polymeric, and metallic materials by fs-LIFT (Conference Presentation)
Paper 10523-26
Time: 4:20 PM - 4:40 PM
Author(s):
Show Abstract
Laser induced forward transfer bioprinting of immune cells and chemoattractant proteins for immunological responses studies (Conference Presentation)
Paper 10523-28
Time: 4:40 PM - 5:00 PM
Author(s):
Show Abstract
Laser-induced forward transfer (LIFT) of 3D microstructures
Paper 10523-29
Time: 5:00 PM - 5:20 PM
Author(s):
Show Abstract
Wednesday 31 January Show All Abstracts
3D Printing and Industry 4.0: An Industry Perspective
Wednesday 31 January 2018
8:30 AM - 10:00 AM
Location: Room 21 (North Exhibit Level)

The 3D printing/additive manufacturing landscape has changed drastically since the first 3D printer was created in 1984. Originally used mostly for modelling and prototyping, 3D printing is now making its way into mainstream manufacturing. Widespread adoption however, has been slowed or limited by such factors as material options, slow print speeds, equipment cost, and lack of standardization.

At the same time advances in computing, robotics, automation, and the advent of the internet of things have aligned to further disrupt the manufacturing sector. To remain profitable and stay competitive, companies will have to embrace the digitization of manufacturing – Industry 4.0 – which, in addition to these disruptive technologies, will potentially upend traditional supply chain management and production planning as well as require engineers and designers to change their mindset from subtractive to additive.

Attend this panel discussion and find out how industry leaders are addressing the challenges of this exciting marketplace.

See http://spie.org/PW/special-events/Industry-Event for more details.
Coffee Break 10:00 AM - 10:20 AM
Session Plen:
LASE Plenary Session
Wednesday 31 January 2018
10:20 AM - 12:35 PM
Location: Room 21 (North Exhibit Level)

10:20 am: Welcome and Opening Remarks
Koji Sugioka, RIKEN (Japan) and Reinhart Poprawe, Fraunhofer-Institut für Lasertechnik (Germany)

10:25 am: Announcement of the 3D Printing, Fabrication, and Manufacturing Best Paper Award
Henry Helvajian, The Aerospace Corp. (United States)

10:30 am: Announcement of the Harold E. Edgerton Award, given to Sterling J. Backus, Kapteyn-Murnane Labs., Inc. (United States)
Gigahertz Laser Frequency Combs and Dual-Comb Spectroscopy (Plenary Presentation)
Paper 10515-201
Time: 10:35 AM - 11:15 AM
Author(s):
Show Abstract
Optical Lattice Clocks: Reading the 18th Decimal Place of Frequency (Plenary Presentation)
Paper 10515-202
Time: 11:15 AM - 11:55 AM
Author(s):
Show Abstract
Advanced industrial laser systems and applications (Plenary Presentation)
Paper 10525-203
Time: 11:55 AM - 12:35 PM
Author(s):
Show Abstract
Lunch/Exhibition Break 12:35 PM - 2:10 PM
Session 9:
Status Additive Technology
Wednesday 31 January 2018
2:10 PM - 3:00 PM
Location: Room 307 (South Level 3)
Development and qualification of additively manufactured parts for space (Invited Paper)
Paper 10523-30
Time: 2:10 PM - 2:40 PM
Author(s):
Show Abstract
All inkjet printed frequency steered phased array antennas with multi angle receiving demonstrated via simulation
Paper 10523-32
Time: 2:40 PM - 3:00 PM
Author(s):
Show Abstract
Coffee Break 3:00 PM - 3:30 PM
Session 10:
Microprinting
Wednesday 31 January 2018
3:30 PM - 5:10 PM
Location: Room 307 (South Level 3)
Nanoscale 3D printing enables fundamental biology studies (Invited Paper)
Paper 10523-33
Time: 3:30 PM - 4:00 PM
Author(s):
Show Abstract
Current and future role of two-photon polymerization in medical microrobots (Invited Paper)
Paper 10523-34
Time: 4:00 PM - 4:30 PM
Author(s):
Show Abstract
Single-photon micro-additive manufacturing through a multimode optical fiber
Paper 10523-35
Time: 4:30 PM - 4:50 PM
Author(s):
Show Abstract
Synchronization of linear stages and galvo-scanners for efficient direct laser fabrication of polymeric 3D meso-scale structures
Paper 10523-36
Time: 4:50 PM - 5:10 PM
Author(s):
Show Abstract
Thursday 1 February Show All Abstracts
Session 11:
Metal Processing
Thursday 1 February 2018
8:00 AM - 10:20 AM
Location: Room 307 (South Level 3)
The effect of laser focus and process parameters on microstructure and mechanical properties of SLM Inconel 718 (Invited Paper)
Paper 10523-37
Time: 8:00 AM - 8:30 AM
Author(s):
Show Abstract
Development of laser metal deposition technology with IR and blue diode lasers (Conference Presentation) (Invited Paper)
Paper 10523-38
Time: 8:30 AM - 9:00 AM
Author(s):
Show Abstract
Designing for 3D printing: direct metal laser sintering
Paper 10523-39
Time: 9:00 AM - 9:20 AM
Author(s):
Show Abstract
4D manufacturing of intermetallic SMA fabricated by SLM process
Paper 10523-40
Time: 9:20 AM - 9:40 AM
Author(s):
Show Abstract
Selective laser melting of copper using ultrashort laser pulses at different wavelengths
Paper 10523-41
Time: 9:40 AM - 10:00 AM
Author(s):
Show Abstract
Selective laser melting for copper modeling with high power blue diode laser
Paper 10523-42
Time: 10:00 AM - 10:20 AM
Author(s):
Show Abstract
Coffee Break 10:20 AM - 10:50 AM
Session 12:
New Processes and Process Control I
Thursday 1 February 2018
10:50 AM - 12:10 PM
Location: Room 307 (South Level 3)
Possible application of laser heterodyne and ultrasonics as in situ process control for additive manufacturing (Conference Presentation)
Paper 10523-43
Time: 10:50 AM - 11:10 AM
Author(s):
Show Abstract
Rapid TMC laser prototyping: compositional and phase-structural sustainability via combinatorial design of titanium-based gradient alloy reinforced by nano-sized TiC or TiB2 ceramics
Paper 10523-44
Time: 11:10 AM - 11:30 AM
Author(s):
Show Abstract
A compact beam diagnostic device for 3D additive manufacturing systems
Paper 10523-45
Time: 11:30 AM - 11:50 AM
Author(s):
Show Abstract
Solid-state microchip based scanning laser 3D system
Paper 10523-46
Time: 11:50 AM - 12:10 PM
Author(s):
Show Abstract
Lunch/Exhibition Break 12:10 PM - 1:40 PM
Session 13:
New Processes and Process Control II
Thursday 1 February 2018
1:40 PM - 3:20 PM
Location: Room 307 (South Level 3)
Development of hot-engraved letter reading device using a two-dimensional laser distance meter (Conference Presentation)
Paper 10523-47
Time: 1:40 PM - 2:00 PM
Author(s):
Show Abstract
Optics to control thermal effects in selective laser melting
Paper 10523-48
Time: 2:00 PM - 2:20 PM
Author(s):
Show Abstract
In-situ x-ray observation of molten pool dynamics while laser cladding with blue direct diode laser
Paper 10523-49
Time: 2:20 PM - 2:40 PM
Author(s):
Show Abstract
Thermal field monitoring and analysis of its influence on Direct Laser Deposition of single tracks of a nickel superalloy
Paper 10523-50
Time: 2:40 PM - 3:00 PM
Author(s):
Show Abstract
Investigation of direct metal laser sintering process of iron powder with low laser power
Paper 10523-51
Time: 3:00 PM - 3:20 PM
Author(s):
Show Abstract
Back to Top